Profile
Assistant Professor in the field of Mechanical Engineering
Dr. Shivdayal Patel completed his B. E., in Mechanical Engineering at the Shri Govindram Seksaria Institute of Technology and Science, Indore (It established in 1952 (MP Govt.)) in India in 2008, completed his M Tech in Mechanical Engineering at Maulana Azad National Institute of Technology (MANIT/MACT), Bhopal in 2010 and he completed his PhD in Applied Mechanics Department at Indian Institute of Technology (IIT), Delhi in 2016. He joined Institute Superior Technico Lisbon (Portugal) for Probabilistic Design of Offshore structures in Portugal as a Postdoctoral Scientist in Nov 2016 to 12 May 2017. He joined the Department of Mechanical Engineering at the Indian Institute of Information Technology Design and Manufacturing-Jabalpur (IIITDM) in 16 May 2017 where he is working as an Assistant Professor.
Finite Element Modeling Impacts Composites Progressive Damage Modeling Light weight armors design Probabilistic Design Safety and Reliability Sensitivity based Optimization
- B E
Shri Govindram Seksaria Institute of Technology and Science, Indore (It established in 1952 (MP Govt.))
Department Mechanical Engineering - M. Tech
Maulana Azad National Institute of Technology Bhopal
Stress and Vibration Analysis Department of Mechanical Engineering - PhD
Indian Institute of Technology Delhi
Probabilistic Analysis of Composite Plates under Low and High Velocity Impact - Postdoctoral Fellow (PDF)
Institute Superior Technico Lisbon (Portugal)
Reliability of Composite Structures
- July 2016-Dec 2016 Assistant Professor
NIT Delhi
- Jan 2016-Oct 2016 Research Associate
IIT Delhi
- Nov 2017-April 2017 Post Doctoral Research Experience
Institute Superior Technico Libon
- May 2017-Till date Assistant Professor
Indian Institute of Information Technology Design & Manufacturing Jabalpur
- May 2017-Till Date ASSISTANT PROFESSOR
IIITDM JABALPUR
- OCT-2018-25/08/2019 ME Placement Cell Member
IIITDM JABALPUR
- May 2018-Aug-2021 ME GEM Purchase
IIITDM JABALPUR
- May 2018-Aug-2021 Science & Technology Counsellor
IIITDM JABALPUR
- May 2018-NOV-2020 Hall-4 Warden
IIITDM JABALPUR
- OCT-2018-OCT-2020 Racing Car Club (FIC)
IIITDM JABALPUR
- Post-Doctorate Fellowship
FCT, Institute Superior Technico Lisbon, Portugal
- 1st Position in Hindi writing Essay Competition
Swachh Bharat Abhiyan IIITDM Jabalpur
- 3rd Position in Hindi writing Essay Competition
Swachh Bharat Abhiyan IIITDM Jabalpur
- Best Research Paper Award
Proc. 1st international and 4th National Conference of Reliability and Safety (INCRS-2018)
- Best MTech Thesis Silver Medal Award
Rajesh Kumar (2020) " Blast analysis of sandwich Structure" PDPM IIITDM Jabalpur
- Best Research Paper Award
Kumar Maharshi, Shivdayal Patel" Experimental Uncertainty Analysis of Failure Strains for Jute Fiber Composites" International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021)
- Best Research Paper Award
Amandeep Singh, Shivdayal Patel "Fatigue Failure Analysis of Spur Gear" International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021)
- Best Research Paper Award
Vikrant Sen, Shivdayal Patel "Low Velocity Impact Analysis of Corrugated Sandwich Structure" International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021)
- 1st Position in Hindi writing Essay Competition (Hindi Pakhwada-2021)
1st Position in Hindi writing Essay Competition (Rs. 2500/-) PDPM IIITDM Jabalpur
- Editorial Board Member, Journal of Nature Scientific Reports (Springer journal)
Mechanical Engineering https://www.nature.com/srep/about/editors#engineering_section
My courses
Current & Previous
Course Code | Course name | Category | Institute |
---|---|---|---|
ME 306 | Design of Mechanical Components | UG/ | IIITDM Jabalpur |
DS 302 | Engineering Design (Lab) | UG/ | IIITDM Jabalpur |
DS101 | Engineering Graphics (Lab) | UG/ | IIITDM Jabalpur |
ME535 | Finite Element Methods for Mechanical Engg. | PG/PhD | IIITDM Jabalpur |
ME309A | Finite Element Methods for Mechanical Engg. | UG/ | IIITDM Jabalpur |
ME621 | ADVANCED MECHANICS OF SOLIDS | PG/PhD | IIITDM Jabalpur |
OE9 | Probabilistic Design of Mechanical Elements | UG/PG/PhD |
Research
Areas or Specialisation / Project Activities / Publications / Books
Impacts, Probabilistic Design, Composite
- Integrated Bunkers Design and Analysis of Avalanche Protection
Integrated Bunkers Design and Analysis of Avalanche Protection, DST (DDP) Rs. 1,80,00,000/-(Submitted)
- Design and development of Double Air Suction Resuscitation Device with Automated Customization
Design and development of Double Air Suction Resuscitation Device with Automated Customization DST (DDP) Rs. 15,21,000/- (Submitted)
- Development of the AI based technique to predict the multiple defects of the two-stage gearbox
Development of the AI based technique to predict the multiple defects of the two-stage gearbox ( CRG/2021/006722) Rs. 40,13,960/-(Accepted)
- Ventilator Design IIITDM Jabalpur, DIC , PDPM IIITDM Jabalpur
Ventilator Design IIITDM Jabalpur, DIC , PDPM IIITDM Jabalpur Rs. (26,000/-)
- Mechanical characterization of natural fiber composites, PDPM IIITDM Jabalpur
Mechanical characterization of natural fiber composites, PDPM IIITDM Jabalpur Rs. (2,00,000/-)
Patel, M., Patel, S. (2024). Dynamic Response Comparison of Sandwich Panels with Honeycomb and Foam Core Under Blast Loads, In: Book Editor(s):Atul Kumar Sahu, Rakesh D. Raut, Rohit Raja, Anoop Kumar Sahu, Nitin Kumar Sahu, Industrial and Manufacturing Designs: Quantitative and Qualitative Analysis, Wily Publication, https://doi.org/10.1002/9781394212668.ch10
Verma J G, Raghav MS, Patel S, and Kankar P.K. (2023) Multi-faults diagnosis of the gearbox by deep convolution neural network, In: Irshad Ahmad Ansari and Varun Bajaj, Advanced Signal Processing for Industry 4.0, Volume 2 Security issues, management and future opportunities, IOP Publishing Ltd 2023 doi:10.1088/978-0-7503-5658-9ch11
Raghav, M.S., Singh, A., Patel, S. (2023). Crack Propagation Analysis of Spur Gear. In: Dikshit, M.K., Soni, A., Davim, J.P. (eds) Advances in Manufacturing Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-4208-2_30.
Patel, S., Sheorey, T. (2023). Design and Development of Double Air Suction Resuscitation Device Using Scotch Yoke Mechanism. In: Gupta, V.K., Amarnath, C., Tandon, P., Ansari, M.Z. (eds) Recent Advances in Machines and Mechanisms. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-3716-3_37
Patel, M., Patel, S. (2023). Numerical Analysis on Hexagonal Honeycomb Sandwich Structure Under Air-Blast Loading. In: Gupta, V.K., Amarnath, C., Tandon, P., Ansari, M.Z. (eds) Recent Advances in Machines and Mechanisms. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-3716-3_59
Pathak, R.K., Patel, S., Gupta, V.K. (2023). Ballistic Impact Behavior of 3D Hybrid Composite Laminates. In: Gupta, V.K., Amarnath, C., Tandon, P., Ansari, M.Z. (eds) Recent Advances in Machines and Mechanisms. Lecture Notes in Mechanical Engineering. Springer, Singapore. https://doi.org/10.1007/978-981-19-3716-3_58.
Soni S., Pathak R.K. and Patel S (2022) “High-velocity impact analysis of CFRP composite” In: Singari R.M, Jain PK, Kumar H: Advances in Manufacturing Technology and Management - Proceedings of 6thInternational Conference on Advanced Production and Industrial Engineering (ICAPIE)- 2021, Lecture Notes in Mechanical Engineering (LNME) Springer Delhi Technological University-New Delhi 18-19 June 2021. https://doi.org/10.1007/978-981-16-9523-0_12
Pathak RK, Patel S and Gupta VK (2022) “Ballistic performance of 3D hybrid composite laminates” In: Singari R.M, Jain PK, Kumar H: Advances in Manufacturing Technology and Management - Proceedings of 6thInternational Conference on Advanced Production and Industrial Engineering (ICAPIE)- 2021, Lecture Notes in Mechanical Engineering (LNME) Springer Delhi Technological University-New Delhi 18-19 June 2021. https://doi.org/10.1007/978-981-16-9523-0_13
Maharshi K. and Patel S. (2022) “Experimental and Statistical analysis of the Jute fabric composites under tensile loading”In: Singari R.M, Jain PK, Kumar H: Advances in Manufacturing Technology and Management - Proceedings of 6thInternational Conference on Advanced Production and Industrial Engineering (ICAPIE)- 2021, Lecture Notes in Mechanical Engineering (LNME) Springer Delhi Technological University-New Delhi 18-19 June 2021. https://doi.org/10.1007/978-981-16-9523-0_15
Sen V. and Patel S. (2022) “Corrugated sandwich structure modeling under low-velocity impact” In: Singari R.M, Jain PK, Kumar H: Advances in Manufacturing Technology and Management - Proceedings of 6thInternational Conference on Advanced Production and Industrial Engineering (ICAPIE)- 2021, Lecture Notes in Mechanical Engineering (LNME) Springer Delhi Technological University-New Delhi (Accepted) 18-19 June 2021. doi: 10.1007/978-981-16-9523-0_11
Singh A. and Patel S. (2021) "Fatigue Failure Analysis of Spur Gear" International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab (Accepted) 25-27 June 2021 CRC Press.
Joshi S., Patel S., Panwar R. (2021) "Natural fiber constituted electromagnetic wave absorbing composites: A short review" International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab (Accepted) 25-27 June 2021 CRC Press.
Kumar M. and Patel S. (2021) "Experimental Uncertainty Analysis of Failure Strains for Jute Fiber Composites" International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab (Accepted) 25-27 June 2021 CRC Press.
Patel M. and Patel S. (2021) "Safety Analysis of Honeycomb Sandwich Structure under Blast Load" International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab (Accepted) 25-27 June 2021 CRC Press.
Sen V. and Patel S. (2021) "Low-Velocity Impact Analysis of Corrugated Sandwich Structure" International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab (Accepted) 25-27 June 2021 CRC Press.
Patel M, Patel S, Sahu DP, Sahu SK and Singh MK (2021)" Investigation of Macro-hardness and Immersed Corrosion Behavior of Sand Cast SiC and B4C Particulate Reinforced AA5052 MMCs. Lecture Notes in Mechanical Engineering (LNME) (Accepted) IPDIMS 2020, NIT Roukila, Feb-12-14-2021
Patel S., Sontakke A., Ahmad S. (2021) Reliability Assessment of CFRP Composite Laminate Subjected to Low Velocity Impact Damage. In: Saha S.K., Mukherjee M. (eds) Recent Advances in Computational Mechanics and Simulations. Lecture Notes in Civil Engineering, vol 103. Springer, Singapore. https://doi.org/10.1007/978-981-15-8138-0_46.
Patel S. and Vusa V. R (2020) Safety and Crashworthiness Analysis of Vehicle Armors under Impact Loading, Lect. Notes Mechanical Engineering, Vijay Kumar Gupta et al. (Eds): Reliability and Risk Assessment in Engineering, Springer, ISBN: 978-981-15-3745-5, 485550_1_En, (12).
Patel S, Awasthi M, Ahmad S, (2020) Safety Assessment of Femur, Notes Mechanical Engineering, Vijay Kumar Gupta et al. (Eds): Reliability and Risk Assessment in Engineering, Springer, ISBN: 978-981-15-3745-5, 485550_1_En, (44).
Shivdayal Patel, Gupta V.K. (2019) Reliability Analysis of Composite Components under Low-Velocity Impact, In: Prabhakar V. Varde, Raghu,V. Prakash, Gopika Vinod, Reliability, Safety and Hazard Assessment for Risk-Based Technologies, Springer, 171-728, ISBN: 978-981-13-9007-4.
Verma J.G. Shivdayal Patel, Kankar P. K. (2019) Mesh stiffness variation due to the effect of back-side contact of gears, In: Prabhakar V. Varde, Raghu,V. Prakash, Gopika Vinod, Reliability, Safety and Hazard Assessment for Risk-Based Technologies, Springer, 171-728, ISBN: 978-981-13-9007-4.
Patel S., C. Guedes, Soares (2017) Probability of Failure of composite beams under the high-velocity impact, structural reliability safety and environmental protection, In Carlos Guedes, Soares, and Y. Garbatov, Progress in the Analysis and design of Marine Structures, London: Taylor and Frances, ISBN: 978-1-315-15736-8.
Patel S. Ahmad, S. (2016) Safety and reliability analysis of composites under low-velocity impact, Structure Safety and Reliability, ASME 49941, Volume 3: V0003T02A006. ASME, ISBN:978-0-7918-4994-1., doi: 10.1115/OMAE2016-54582.
Patel S. Ahmad S. (2016) Failure Prediction of Fiber Reinforced Laminated Composite Plates under Low Velocity Impact. Proc. ASME 50008, Volume 9: Prof. Norman Jones Honoring Symposium on Impact Engineering, Prof. Ueda Honoring Symposium on Idealized Nonlinear Mechanics for Welding and Strength of Structures, V0009T12A018. ASME ISBN: 978-0-7918-5000-8,doi:10.1115/OMAE2016-54486.
Patel S. Ahmad, S. and Mahajan, P. (2015) Stochastic Finite Element Analysis of Composite Body Armor. In: Vasant Matsagar, Advance in Structural Engineering Mechanics, India. Springer. 259-272. ISBN: 978-81-322-2189-0.
Patel S. Ahmad, S. and Mahajan, P. (2014) Probabilistic Analysis of Composite Armor under Ballistic Impact. In: Ajay Verma, Arvind Kumar and M. K. Pradhan, Advancements and current trends in Industrial, Mechanical and Production Engineering. India: Excellent. 59-66. ISBN:978-93-84935-05-4.
Patel S. Ahmad, S. and Mahajan, P. (2013) Probabilistic Failure Analysis of Composite Beams under Ballistic Impact. In: George Deodatis, Bruce R. Ellingwood and Dan M. Frangopol, Safety, Reliability, Risk and Life-Cycle Performance of Structures and Infrastructures. London: Taylor and Frances. 4389–4395. ISBN: 978-1-138-00086-5.
- Patel M. and Patel S.,(2024) Dynamic Behavior Analysis of Steel, Aluminum, and Composite Plates under Extreme Air Blast Loadings. Mechanics of Advanced Materials and Structures SCIE (Accepted)
- Patel M. and Patel S. (2024) Determination of High-Strength Polymer Composite Reinforcement Effect on the Armor-Grade Aluminum Plates’ Explosion Resistance - A Computational Perspective, Journal of Polymer Composite, https://doi.org/10.1002/pc.29205 SCI.
- Patel, M., Patel, S. (2024). Assessment of Dynamic Response of Armor Grade Metallic Plates and FMLs under Air-Blast Loads. Mechanics of Advanced Materials and Structures, https://doi.org/10.1080/15376494.2024.2382368.
- Patel M., Patel S. (2024) A Comparative Blast Mitigation Performance Evaluation of Metallic Sandwich Panels with Honeycomb, Corrugated, Auxetic, and Foam Cores, International Journal of Structural Stability and Dynamics, doi/10.1142/S021945542550186X (Accepted) SCIE
- Maharshi K, Patel S. (2024) Experimental and Numerical Analysis of Lightweight Hybrid Composites under Low velocity impact, Journal Applied Composite Materials. doi: 10.1007/s10443-024-10237-w(Accepted) SCIE,
- Rashmi Sawant, Shivdayal Patel (2024) Efficient design of composite honeycomb sandwich panels under blast loading, Proc IMechE Part C: J Mechanical Engineering Science, 1–21 . DOI: 10.1177/09544062241235567 SCI
- Patel, Murlidhar; Patel, Shivdayal (2024) Dynamic Response Optimization of the Multistage Sandwich Structures Imperiled to Explosive Loading, Part L: J Materials: Design and Applications. https://doi.org/10.1177/14644207241238220. SCIE
- Patel M. and Patel S.,(2023) Design and analysis of lightweight stiffened honeycomb metallic sandwich panels under high-intensity air blast. Part L: J Materials: Design and Applications 238(1), 22–38. DOI: 10.1177/14644207231180811. SCIE
- Patel M. and Patel S. (2023) Blast Mitigation Analysis of Novel Designed Sandwich Structures using Novel Approaches. Mechanics of Advanced Materials and Structures https://doi.org/10.1080/15376494.2023.2243614
- Singh M., and Patel S. (2023) Crack Propagation and Fatigue Life Estimation of Spur Gear with and without Spalling Failure, Theoretical and Applied Fracture Mechanics (Accepted) https://doi.org/10.1016/j.tafmec.2023.104020
- Patel M., Patel S., Ahmad S. (2023) Blast Analysis of Efficient Honeycomb Sandwich Structures with CFRP/Steel FML Skins; International Journal of Impact Engineering; 2023,178:104609. https://doi.org/10.1016/j.ijimpeng.2023.104609 (Accepted ) IF: 5.1
- Patel M. and Patel S., Ahmad S. (2023) A novel design of blast proof sandwich structure with hybrid skin, Materials Today Proceedings, https://doi.org/10.1016/j.matpr.2023.05.191
- Bheekam Gaur, Murlidhar Patel, Shivdayal Patel (2023) Strain Rate Effect on CRALL under High-Velocity Impact by Different Projectiles Journal of the Brazilian Society of Mechanical Sciences and Engineering. DOI : 10.1007/s40430-023-04031-1 (Accepted)
- Pathak RK, Patel S and Gupta VK , Bandaru AK. (2023) A computational analysis of the high velocity impact performance of lightweight 3D hybrid composite armors, Applied composite Materials (Accepted) doi: 10.1007/s10443-023-10112-0
- Sah A. K. , Pathak RK, Patel S. (2023) Design and analysis of hybrid composite panels under ballistic impact , Materials Today Proceedings. 87 (1) : 104-109, "https://doi.org/10.1016/j.matpr.2023.02.031
- Patel M. and Patel S.,(2023) Investigation of air-blast mitigation by single-V and multi-V shape face sheets used honeycomb sandwich panels (Accepted) Materials Today: Proceedings.https://doi.org/10.1016/j.matpr.2023.06.432.
- Patel M. and Patel S.,(2022) Novel Design of Honeycomb Hybrid Sandwich Structures under Air-Blast, Journal of Sandwich Structures and Materials 24(8) 2105–2123. DOI: 10.1177/10996362221127967 IF: 3.477
- Pathak RK, Patel S and Gupta VK (2022) " A Novel Design of Hybrid Ceramic Composite Plate under Ballistic Impact Journal: Mechanics of Advanced Materials and Structures " (Accepted) DOI: 10.1080/15376494.2022.2111623.
- Pathak RK, Patel S and Gupta VK (2022) Efficient Design of Kevlar/Basalt Hybrid Composite Laminates under Ballistic Impact. Advanced Composite Materials (Accepted) 10.1080/09243046.2022.2076022. IF:2.87
- Maharshi K, and Patel S. (2022) A study of the Flexural Properties of Jute Fabric Reinforced Epoxy Composite: Experimental and Uncertainty Analysis. Journal of Natural Fibers, doi: 10.1080/15440478.2022.2068176 (Accepted) IF: 5.32
- Singh M., Singh A. and Patel S. (2022) “Fault Analysis of Spur Gear using XFEM” Journal of Engineering Failure Analysis, Volume :134:106060, April 2022, 106060 IF: 3.114 (SCIE), https://doi.org/10.1016/j.engfailanal.2022.106060
- Patel S. and Patel M.,(2022) The efficient design of hybrid and metallic sandwich structure under air blast loading, 24(3): 1706–1725. Journal of Sandwich Structures and Materials, doi.org/10.1177/10996362211065748, IF: 5.497
- Pathak RK, Patel S and Gupta VK (2023) "Novel hybrid design of composite armour under ballistic impact" Materials Today: Proceedings. 87(1) : 55-60. https://doi.org/10.1016/j.matpr.2022.09.178
- Abhinath Shukla, Shivdayal Patel (2023) Fatigue failure analysis of spur gear under moving load. Materials Today: Proceedings. Volume 72, (6), 2023, Pages 2803-2810. https://doi.org/10.1016/j.matpr.2022.07.025
- Bheekam Gaur, Murlidhar Patel, Shivdayal Patel (2023) Strain rate effect analysis of hybrid composites under the high-velocity impact. Volume 72,(6), 2023, Pages 2811-2816 https://doi.org/10.1016/j.matpr.2022.07.082
- Patel M. and Patel S.,(2022) Influence of honeycomb core height on the blast mitigation performance of sandwich panel Materials Today Proceeding 74 (4): Pages 611-620, https://doi.org/10.1016/j.matpr.2022.09.530
- Rashmi Sawant, Murlidhar Patel, Shivdayal Patel (2023) “Numerical Analysis of Honeycomb Sandwich structure under Blast Load’” Materials Today: Proceedings, 87 (1) 67-73. https://doi.org/10.1016/j.matpr.2022.09.547.
- Patel M and Patel S. (2022) Effect of honeycomb cell size on blast performance of sandwich panels, Materials Today Proceeding, https://doi.org/10.1016/j.matpr.2022.10.283
- Joshi S., Kumar M., Goyal N., Patel S., Panwar R (2022) Multifunctional Carbon-Basalt Hybrid Composites Against Bird Strike Materials Today Proceeding (Accepted)
- Joshi S, Patel S. (2021) Review on mechanical and thermal properties of pineapple leaf fiber (PALF) reinforced composite. Journal of Natural Fibers, (Accepted) IF: 5.32
- Maharshi K, Patel S. (2021) Experimental statistical analysis of tensile and shear properties of the jute fabric epoxy composites, Journal of Natural Fiber, 19(14):8714-8726, DOI:10.1080/15440478.2021.1966572 (Accepted) : IF=5.32
- Kala T., Maharshi K, Patel S. and Panwar R. (2021) Electromagnetic and Mechanical Characterization of Iron Reinforced Natural Fiber Composites for Microwave Absorbing Applications, Advanced Composite Materials, 2021 https://doi.org/10.1080/09243046.2021.1904345 IF:2.87
- Kumar R., Patel S. (2020) Failure Analysis on Octagonal Honeycomb Sandwich Panel under Air Blast Loading, Materials Today: Proceedings. 46(19): 9667-9672.
- Verma, J G, Patel S., and Kankar PK. (2020) “Fault Diagnosis of Gearbox using ITD-Tunable Q-Factor Wavelet Transformation.” Indian Journal of Pure and Applied Physics :59: 223-228 .
- Patel S. (2019) Probabilistic dynamic analysis of composite plates due to low velocity impact. Life Cycle Reliability and Safety Engineering, 8(4): 283-290. https://doi.org/10.1007/s41872- 019-00087-y.
- Shivdayal Patel, Venkata Ravi Vusa, C. Guedes Soares (2019) Crashworthiness Analysis of Polymer Composites under Axial and Oblique Impact Loading, International Journal of Mechanical Sciences, 156: 221-234. IF: 5.32
- Shivdayal Patel, C. Guedes Soares (2018) Reliability Assessment of Glass Epoxy Composite Plates due to Low Velocity Impact, Composite Structures,200: 659-668. IF=5.2
- Patel S., Ahmad S., Mahajan P. (2018) Safety Assessment of Composite Beam under Ballistic Impact, Journal of thin walled structures, 126: 162-170. Doi:10.1016/j.tws.2017.05.027. IF:4.03
- Bandaru AK, Patel S., Bhatnagar N., Ahmad S. (2018) An experimental and numerical investigation on the low velocity impact response of thermoplastic hybrid composites, Journal of Composite Materials. 52(7): 877-889, IF: 2.59 (SAGE, Publication)
- Patel S., Ahmad S. (2017) Probabilistic failure of Graphite Epoxy Composite plates due to low velocity Impact, ASME: Journal Mechanical Design, 139(4):044501-044501-4. doi:10.1115/1.4035678, IF: 3.25
- Shivdayal Patel, C. Guedes Soares (2017) System Probability of Failure and Sensitivity Analyses of Composite Plates under Low Velocity Impact. Composite Structures, 180: 1022-1031. https://doi.org/10.1016/j.compstruct.2017.08.054. IF: 5.2
- Patel S, Ahmad S., Mahajan P. (2017) Safety assessment of composite Armor Under Ballistic Impact, Journal of Procedia Engineering. 173, 1901-1908.
- Patel S., Ahmad S., Mahajan P. (2016) Probabilistic finite element analysis of S2–glass epoxy composite beams for damage initiation due to high velocity impact, ASME J. Risk Uncertainty Part B, Mechanical Engineering 2(4). 044504-044504-3.
- BA Kumar, Patel S., Sachan Y., Ahmad S., Alagirusamy R., Bhatnagar N. (2016) Low velocity impact response of 3D angle-interlock Kevlar/basalt reinforced polypropylene composites. Materials and Design, 105, 323-332. IF: 7.99
- BA Kumar, Patel SD., Sachan Y., Ahmad S., Alagirusamy R., Bhatnagar N. (2016) Mechanical behavior of Kevlar/basalt reinforced polypropylene composites. Composites Part A, 90:642-652. IF: 7.68
- BA Kumar, Patel S., Sachan Y., Ahmad S., Alagirusamy R., Bhatnagar N. (2016) Mechanical behavior of 3D angle-interlock Kevlar/basalt reinforced polypropylene composites. Polymer Testing, 55, 238-246. IF: 4.28
- Patel S., Ahmad S., Mahajan P. (2015) Probabilistic Failure Analysis of Composite Beams for optimum ply arrangements under Ballistic Impact, Journal of Aerospace Science and Technology 1: 36-47. DOI: 10.17265/2332-8258/2015.01.005.
- Patel S., Ahmad S., Mahajan P. (2014) Reliability Analysis of Composite Plate under Low Velocity Impact using Gaussian Response Surface Method, International Journal for Computational Methods in Engineering Science and Mechanics 15(3):218-226. DOI:10.108
- Patel S., Ahmad S., Mahajan P. (2013) Probabilistic failure analysis of composite plate due to low velocity impact, Journal of Indian National Science Academy 79(4), 773-779. ISSN:2454-9983
- Editorial Board Member of the Journal of Scientific Reports (Mechanical Engineering)
-
Patel S., C. Guedes, Soares (2017) Probability of Failure of composite beams under high velocity impact, structural reliability safety and environmental protection, MARSTRUCT 2017, May 8, 2017, Institute Superior Tecnico Lisbon, Portugal.
-
Patel S., Patel B.P., Ahmad, S. (2017) Estimation of residual stresses in steel welded joints using three dimensional finite element analysis, Proc. ASME, Ocean Offshore & Arctic Engineering (OMAE) 2017-62148, Ocean engineering, Computational Mechanics a
-
Patel S. Ahmad, S. (2017) Stochastic dynamic analysis of composite plates for damage initiation due to low velocity impact, Proc. ASME, Structure Safety and Reliability, June 25, 2017, OMAE 2017-62565. (Draft Paper Accepted)
-
Patel S. Ahmad, S. and Mahajan, P. (2016) Safety Assessment of Composite Armor under Ballistic Impact. Proceeding of the 11th International Symposium on Plasticity and Impact Mechanics, IMPLAST (11-14 Dec.) 2016. IIT Delhi, India.
-
Patel S. Ahmad, S. (2016) Safety and reliability analysis of composites under low velocity impact. Proceeding of the ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016) June, 2016 Busan, South Korea.
-
Patel S. Ahmad, S. (2016) Failure Prediction of Fiber Reinforced Laminated Composite Plates under Low Velocity Impact. Proceeding of the ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering (OMAE2016) June, 2016 Busan, Sout
-
Patel S. Ahmad, S. and Mahajan, P. (2015) Safety assessment of composite targets under low velocity impact, Proceeding of the 2nd Indian Conference on Applied Mechanics (INCAM) IIT Delhi, India.
-
Patel S, Ahmad S., Mahajan P. (2014) Probabilistic Analysis of Composite Armor Under Ballistic Impact, International conference on Industrial, Mechanical and Production engineering (ICIMPACT), MANIT Bhopal, India.
-
Patel S., Ahmad S., Mahajan P. (2014) Stochastic Finite Element Analysis of Composite Plate due to Low Velocity Impact, 5th International Congress on Computational Mechanics and Simulation (ICCMS), CSIR-Structural Engineering Research Centre Chennai, Ind
-
Patel S. Ahmad S., and Mahajan, P. (2014) Stochastic Finite Element Analysis of Composite Body Armor. Proceeding of the Structural Engineering Convention (SEC-2014), IIT Delhi, India.
-
Patel S., Ahmad S., Mahajan P. (2013) Probabilistic Failure Analysis of Composite Beams under Ballistic Impact, Proceeding of the 11th International Conference on Structural Safety & Reliability ICOSSAR, 16-20 June, New York.
-
Patel S., Ahmad S., Mahajan P. (2013) Comparative Probabilistic Failure Analysis of Composite Beams under impact, Proceeding of the Indian Conference on Applied Mechanics (INCAM) 2013 IIT Madras, India.
-
Patel S., Ahmad S., Mahajan P. (2013) Safe and Reliable Design of composite plate under Low Velocity Impact, Indo-Russian Workshop IIT Madras, India; pp.332-336.
-
Patel S., Ahmad S. (2012) Probabilistic Behavior and Reliability Based Design Applications of Composites, Indo-Danish Workshop Future Composite Technologies for Wind Turbine Blades, IIT Delhi, India.
-
Patel S., Ahmad S., Mahajan P. (2012) Probabilistic Analysis of Composite Plate under Ballistic Impact. Proc. of the International Conference on Mechanics of Nano, Micro and Macro Composite Structures, Politecnico di Torino, Italy.
-
Patel S., Ahmad S., Mahajan P. (2012) Probabilistic Assessment of Composite Plate for Damage Propagation under Impact, 3rd Asian Conference on Mechanics of Functional Materials and Structures, (ACMFMS -2012) IIT Delhi, India; pp.775 -778.
-
Patel S., Ahmad S., Mahajan P. (2012) Reliability Analysis of Composite Plate under Low Velocity Impact using Gaussian Response Surface Method, Proceeding of the 4th International Congress on Computational Mechanics and Simulation (ICCMS), IIT Hyderabad
-
Patel S., Mahajan P, Ahmad S. (2011) Probabilistic Analysis of Anisotropic Composite Plate Damage Due to Low Velocity Impact, Indian Society for Advancement of Materials and Processing Engineering. Proceeding of the 10th National Conference on Composite
-
Patel S, Singh M, Ahmad S, (2018) Safety and Reliability of Composite Production Riser in Design Phase, Proc. 1st international and 4th National Conference of Reliability and Safety (INCRS-2018), ISBN No : 978-93-5291-614-6, IIITDM Jabalpur.
-
Patel S, (2018) Probabilistic Dynamic Analysis of Composite Plates for Damage Initiation Due to Low Velocity Impact, Proc. 1st international and 4th National Conference of Reliability and Safety (INCRS-2018), ISBN No : 978-93-5291-614-6, IIITDM Jabalpur.
-
Patel S, Awasthi M, Ahmad S, (2018)"Safety Assessment of Femur Proc. 1st international and 4th National Conference of Reliability and Safety (INCRS-2018), ISBN No : 978-93-5291-614-6, IIITDM Jabalpur.
-
Patel S. and Vusa V. R (2018) "Safety and Crash worthiness Analysis of Vehicle Armors under Impact Loading" Proc. 1st international and 4th National Conference of Reliability and Safety (INCRS-2018), ISBN No: 978-93-5291-614-6, IIITDM Jabalpur
-
Patel S (2017) Progressive Damage Modeling on Basalt-Kevlar Hybrid Composite under Ballistic Impact. Physics and mechanics of new materials and their application (PHENMA- 2017), ISBN No : 978-93-5281-337-7, IIITDM Jabalpur
-
Patel S. Ahmad, S. (2018) Stochastic dynamic analysis of composite plates for damage initiation due to low velocity impact, Proc. ASME. 51333; Volume 11B: Honoring Symposium for Professor Carlos Guedes Soares on Marine Technology and Ocean Engineering, V11BT12A027.June 17, 2018 OMAE2018-78690 doi: 10.1115/OMAE2018-78690
-
Patel S., Patel B.P., Ahmad, S. (2018) Estimation of residual stresses in steel welded joints using three dimensional finite element analysis, Proc. ASME. 51265; Volume 7A: Ocean Engineering, V07AT06A034.June 17, 2018, OMAE2018-78628
-
Patel S. Gupta V.K. (2019) Reliability Analysis of Composite Components under Low Velocity Impact, Proceedings of 4th International Conference on Reliability, Safety and Hazard (ICRESH-2019) Indian Institute of Technology Madras January 10-13.
-
Verma J.G. Kankar P. K. Patel S. (2019) Mesh stiffness variation due to the effect of back-side contact of gears, Proceedings of 4th International Conference on Reliability, Safety and Hazard (ICRESH-2019) Indian Institute of Technology Madras January 10-13.
-
Patel S. Ahmad, S. and Mahajan, P. (2019) Uncertainty Modeling and Stochastic Behavior of Glass Epoxy Composite Components under Low-Velocity Impact, Proceedings of The 3 rd South-East Asia –Japan Conference on Composite Materials, (SEAJCCM 2019), Institute Teknologi Bandung, Indonesia 4-6th August-2019.
-
Patel S., Kumar R. (2019) Numerical Analysis on Steel Honeycomb Sandwich Panel under Air Blast Loading, Proceedings of 7th International Congress on Computational Mechanics and Simulation (ICCMS-2019), IIT Mandi, 11-13th Dec-2019.
-
Patel S., Solanki D. (2019) Numerical Analysis of Ship Structure due to Under Water Explosions, Proceedings of 7th International Congress on Computational Mechanics and Simulation (ICCMS- 2019), IIT Mandi, 11-13th Dec-2019.
-
Patel S., Sontakke A., Ahmad S.(2019)Reliability Assessment of CFRP Composite Laminate Subjected to Low Velocity Impact, Proceedings of 7th International Congress on Computational Mechanics and Simulation (ICCMS-2019), IIT Mandi, 11-13th Dec-2019.
-
Kumar R., Patel S. (2019) Failure Analysis on Octagonal Honeycomb Sandwich Panel under Air Blast Loading, Proceedings of International Mechanical Engineering Congress 2019: Materials Science, NIT Tiruchirappalli, India, 29th Nov-1st Dec 2019.
-
Sen V. and Patel S. (2021) “Corrugated sandwich structure modeling under low velocity impact” Proc. 6th International Conference on Advanced Production and Industrial Engineering (ICAPIE 2021) Delhi Technological University-New Delhi, 18-19 June 2021.
-
Soni S., Pathak R.K. and Patel S (2021) “High velocity impact analysis of CFRP composite” Proc. 6th International Conference on Advanced Production and Industrial Engineering (ICAPIE 2021) Delhi Technological University-New Delhi, 18-19 June 2021.
-
Pathak RK, Patel S and Gupta VK (2021) “Ballistic performance of 3D hybrid composite laminates” Proc. 6th International Conference on Advanced Production and Industrial Engineering (ICAPIE 2021) Delhi Technological University-New Delhi, 18-19 June 2021.
-
Maharshi K. and Patel S. (2021) “Experimental and Statistical analysis of the Jute fabric composites under tensile loading” Proc. 6th International Conference on Advanced Production and Industrial Engineering (ICAPIE 2021) Delhi Technological University-New Delhi, 18-19 June 2021.
-
Patel M, Patel S, Sahu DP, Sahu SK and Singh MK (20121)" Investigation of Macro-hardness and Immersed Corrosion Behavior of Sand Cast SiC and B4C Particulate Reinforced AA5052 MMCs. Proceeding National conference, 2nd Innovative Product Design and Intelligent Manufacturing System, IPDIMS 2020, NIT Roukila, Feb-12-14-2021.
-
Verma, J G, Patel S., and Kankar PK. “Fault Diagnosis of Gearbox using ITD-Tunable Q-Factor Wavelet Transformation.” 1st International Conference on Energy, Materials Sciences & Mechanical Engineering, EMSME-2020, NIT Delhi, India, October 30- November 01, 2020.
-
Joshi S., Patel S., Panwar R. (2021) "Natural fiber constituted electromagnetic wave absorbing composites: A short review" Proc. International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab, 25-27 June 2021.
-
Kumar M. and Patel S. (2021) "Experimental Uncertainty Analysis of Failure Strains for Jute Fiber Composites" Proc. International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab, 25-27 June 2021.
-
Patel M. and Patel S. (2021) "Safety Analysis of Honeycomb Sandwich Structure under Blast Load" Proc. International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab, 25-27 June 2021.
-
Sen V. and Patel S. (2021) "Low Velocity Impact Analysis of Corrugated Sandwich Structure" Proc. International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab, 25-27 June 2021.
-
Singh A. and Patel S. (2021) "Fatigue Failure Analysis of Spur Gear" Proc. International Conference on Recent Development on Materials, Reliability, Safety and Environmental Issues (IMRSE– 2021) Dr B R Ambedkar National Institute of Technology, Jalandhar, Punjab, 25-27 June 2021.
-
Pathak RK, Patel S and Gupta VK (2021) “Ballistic impact behavior of 3D hybrid composite laminates” Proc. on 5th International Conference on Machines and Mechanisms (iNaCoMM 2021), PDPM IIITDM Jabalpur 9-11 Dec 2021.
-
Patel M. and Patel S. (2021) " Numerical analysis on Hexagonal honeycomb sandwich structure under air blast load" Proc. International Conference on 5th International Conference on Machines and Mechanisms (iNaCoMM 2021), PDPM IIITDM Jabalpur, 9-11 Dec 2021.
-
Murlidhar Patel,Shivdayal Patel (2022) A Novel Design of Blast Proof Sandwich Structure With Hybrid Skin, Proce. of IMPLAST-2022: 13th Symposium on Plasticity and Impact Mechanics, IIT Madras Chennai, India, August 21-26, 2022 (Accepted)
-
Rashmi Sawant, Murlidhar Patel,Shivdayal Patel (2022) Numerical Analysis of Honeycomb Sandwich Structure under Blast Load, Proce. of IMPLAST-2022: 13th Symposium on Plasticity and Impact Mechanics, IIT Madras Chennai, India, August 21-26, 2022 (Accepted)
-
Roopendra Kumar Pathak, Shivdayal Patel and Vijay Kumar Gupta (2022) Ballistic Performance of 3D Kevlar/Basalt Hybrid Composite Armors, Proc. of IMPLAST-2022: 13th Symposium on Plasticity and Impact Mechanics, IIT Madras Chennai, India, August 21-26, 2022 (Accepted)
-
Anand Kumar Sah, Roopendra Kumar Pathak, Shivdayal Patel (2022) Design and Analysis of Hybrid Composite Panels under Ballistic Impact, Proce. of IMPLAST-2022: 13th Symposium on Plasticity and Impact Mechanics, IIT Madras Chennai, India, August 21-26, 2022 (Accepted)
-
Bheekam Gaur, Murlidhar Patel, Shivdayal Patel (2022) Strain Rate Effect Analysis of Hybrid Composites under The High-Velocity Impact, Proce. of 2nd International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2022), King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok Campus, Thailand
-
Abhinath Shukla and Shivdayal Patel (2022) Fatigue Failure Analysis of Spur Gear under Moving Load, Proce. of 2nd International Conference on Sustainable materials, Manufacturing and Renewable Technologies (i-SMaRT 2022), King Mongkut's University of Technology North Bangkok (KMUTNB), Bangkok Campus, Thailand
-
Raghav M.S., Singh A, Patel S "Crack Propagation Analysis of Spur Gear " Proc. of International Conference on Futuristic Advancements in Materials, Manufacturing and Thermal Sciences, ICFAMMT-2022, Institute of Infrastructure Technology Research and Management -Gujarat 20-21 Jan 2022.
-
Raghav M.S., Patel S "Effect of Spalling on the Fatigue Life of Spur Gear" International Conference on Recent Advances in Mechanical Engineering 2022, ICRAM 2022, Indian Institute of Technology Jodhpur, 25-27 August 2022.
-
Murlidhar Patel,Shivdayal Patel (2022) Influence of honeycomb core height on the blast mitigation of sandwich panel, International Conference On Advanced Functional Materials: Future Perspectives (AFMFP-2022), NIT Jalandhar, India, August 6-8, 2022
-
David Navratan, Shivdayal Patel and Sujoy Mukherjee (2022), "Strain rate effect on composite sandwich structure under low velocity impact" Proc. International Conference On Advanced Functional Materials: Future Perspectives (AFMFP-2022), NIT Jalandhar, India, August 6-8, 2022.
-
Murlidhar Patel,Shivdayal Patel (2022) Effect of honeycomb cell size on blast performance of sandwich panels, 3rd International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD-22), Siksha ‘O’ Anusandhan (Deemed to be University), Bhubaneswar, India, August 11-13, 2022
-
Joshi S., Kumar M., Goyal N., Patel S., Panwar R (2022) Multifunctional Carbon-Basalt Hybrid Composites Against Bird Strike, 3rd International Conference on Recent Advances in Mechanical Engineering Research and Development (ICRAMERD-22), Siksha ‘O’ Anusandhan (Deemed to be University), Bhubaneswar, India, August 11-13, 2022
-
"Murlidhar Patel, Shivdayal Patel, (2022) Investigation of air-blast mitigation by single-V and multi-V shape face sheets used honeycomb sandwich panels, Proc. ""An international conference on ADVANCES IN SMART MATERIALS, CHEMICAL & BIOCHEMICAL ENGINEERING (CHEMSMART-2022)"
-
Murlidhar Patel, Shivdayal Patel , Suhail Ahmad and C. Guedes Soares (2023) Numerical Investigation of Air-Blast Performance of Cross-Filled Honeycomb Sandwich Panel , Proc. of ASME 42nd International Conference on Ocean, Offshore & Arctic Engineering (OMAE2023) , 13 June 2023, Melbourne, Australia.
-
Rashmi Sawant, Shivdayal Patel (2023) Numerical Analysis of Composite Honeycomb core Sandwich Structure under Blast Loading. Proc. 2nd International Conference on Recent and Advanced Composite Materials (ICRACM 2023) from 22nd to 24th February 2023.
-
"Murlidhar Patel,Shivdayal Patel (2023) ""“Impact of Stand-off Distance on the Dynamic Response of Honeycomb Sandwich Panel in Air Blast"" "" Mechanika-2022. Proceedings of the 26th International Scientific Conference"" Kaunas, Lithuania Europe 26th MAY 2023"
-
Patel, Murlidhar, Rashmi Sawant, and Shivdayal Patel. "Functionally Graded Materials for Defense Applications - A Critical Review." Novel Applications of Functionally Graded Materials, CRC Press (2024). (Scopus) (Under Review)
-
Patel, Murlidhar, Lokesh Sonkar, and Shivdayal Patel. "The Honeycomb Cell Wall Thickness Effect on Sandwich Panels’ Blast Performance." AIP Conference Proceedings (2024). (Scopus) (Revision Submitted)
-
Patel, Murlidhar, Lokesh Sonkar, and Shivdayal Patel. “The Honeycomb Cell Wall Thickness Effect on Sandwich Panels’ Blast Performance” International Conference on Smart and Innovative Development in Science, Engineering & Technology (SIDSET-2023) Bhilai Institute of Technology (BIT), Durg, India, August 16-18, 2023.
-
Patel, Murlidhar and Shivdayal Patel. “Comparison of the Dynamic Response of a Sandwich Panel under Blast Loads with Equivalent Stiffened and Solid Plates” International Conference on the Physics and Technology of Advanced Materials (PTAM-2023), Institute for Metals Superplasticity Problems of the Russian Academy of Sciences, Ufa, Russia, October 2-6, 2023.
-
Patel, Murlidhar, Shivdayal Patel, Suhail Ahmad, and Carlos Guedes Soares. "A Comparative Assessment of the Dynamic Responses of Solid Plate, Stiffened Plate, and Sandwich Plate of Equal Masses Under Explosive Loadings" 43rd International Conference on Ocean, Offshore and Arctic Engineering (OMAE-2024), Singapore EXPO, Singapore, June 9-14, 2024. (Accepted)
M. Tech./M.Des.
Ph. D.
Contact me
Feel free to contact