Profile
Professor in the field of Mechanical Engineering & Design
Product Design and Innovation, Design Thinking; Advanced Hybrid Manufacturing Processes and Technologies: Dieless Manufacturing, Additive Manufacturing; Computer Aided Design and Analysis: Design Intent, Intelligent CAD, Biologically Inspired Design, Bio-CAD, Medi-CAD, Human Factors in CAD, Humanizing Engineering Design
- PhD
Department of Mechanical Engineering, Indian Institute of Technology Kanpur
- Post Graduate Diploma in Management
Indira Gandhi National Open University, New Delhi
Specialization: Systems Management - M.Tech.
Indian Institute of Technology Kanpur
Specialization: Mechanical Engineering - Certificate Course in German
Kurukshetra University, Kurukshetra
- B.Tech (Hons.)
Regional Engineering College (R.E.C.), Kurukshetra, (now, N.I.T. Kurukshetra) India
Specialization: Mechanical Engineering
- June 2009-Onwards Professor
PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur
- August 2005-May 2009 Associate Professor
PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur
- August 2000-July 2005 Associate Professor (ex-Assistant Professor)
National Institute of Technology (NIT) Kurukshetra
- August 1998-July 2002 Research Engineer
CAD-P Lab, I.I.T. Kanpur
- January 1995-July 1998 Senior Lecturer
R.E.C. (NIT) Kurukshetra
- October 1993-Jan 1995 Project Research Associate
CAM Lab, I.I.T. Kanpur
- August 1988-July 1993 Lecturer
Department of Mechanical Engineering, R.E.C. Kurukshetra
- May 1988-July 1988 Graduate Engineer Trainee
Escorts Limited, Faridabad
- February 2010-February 2012 Member, Board of Governors
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- November 2012-November 2014 Member, Board of Governors
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- February 2012-November 2014 Member, Board of Governors
MANIT Bhopal
- June 1, 2016-August 6, 2019 Dean, Research, Sponsored Projects & Consultancy
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 13, 2010 -March 12, 2013 Dean of Planning and Development
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- September 24, 2013-May 31, 2016 Dean of Planning and Development
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- June 2012-August 2014 Head, Design Discipline
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- October 2011-October 2014 Chief Vigilance Officer
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 2010-March 2013 Member, Building and Works Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- September 2013-May 2016 Member, Building and Works Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- August 2005-onwards Member, Senate
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 2010-March 2013 Chairman, Campus Advisory Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- September 2013-May 2016 Chairman, Campus Advisory Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- February 4, 2015- May 31, 2016 Faculty-in-Charge, Alumni Association
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- December 25, 2015-December 26, 2015 Organizer of First Alumni Meet
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- February 3, 2015-onwards Faculty-in-Charge, Consultancy Cell
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- August 2006-onwards Member, Institute Administrative Group – General Administration
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 2014-onwards Member, Space Allocation Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 22, 2013-onwards Member, Rajyabhasa Karyanvan Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- January 20, 2015-February 2016 Member, Committee to procure furniture of Visitors Hostel
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 3, 2015-onwards Member, Committee to finalize vendor and implement automation
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 25, 2015-onwards Convener, Committee related to hiring of bus services to look into various aspects to the services, and suggest mechanisms to ensure quality of hiring of the services
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- June 15, 2015-onwards Member of the committee to procure Auditorium Chair and Dual Desks
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- July 06, 2015-onwards Convener of the committee to look into the matters related to labour welfare and security norms at different construction sites
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- July 08, 2015-onwards Member of the committee to vet the claims of the Consultants
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- July 10, 2015-onwards Member of the committee for allotment of space to service provider for installation of mobile tower and recommend safety measures at the installation site
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- August 03, 2015-onwards Member of the committee for purchase of furniture of PG Hostel
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- December 17, 2015-onwards Member of the committee to visit all the Buildings/ Works undertaken by CPWD and report the pending Works/ Defective Works/ Incomplete Works
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 2010-onwards Chairman, Campus Advisory Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- March 20 2015-onwards Member, Committee for installation of Closed Circuit Cameras
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- September 22, 2015-onwards Member, Committee for hiring the Security Services
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- February 3, 2016-onwards Nodal Officer for Collaboration with Bharat Forge Ltd.
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- February 3, 2016-onwards In-charge, Institute Presentations
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- February 25, 2016-onwards Convener, Manpower Assessment Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- August 2010-onwards Member, Planning and Evaluation Committee
Jabalpur Engineering College Jabalpur (An autonomous college)
- January 2009-May 2010 Coordinator, International Relations
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- January 2009-March 2010 Coordinator, Research, Development & Planning
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- January 2009- April 2011 Chairman, Students’ Placement Cell
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- January 2009-May 2010 Coordinator, Central Facilities
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- 2005-onwards Member, Campus Advisory Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- June 01, 2010-June 06, 2012 Faculty In-charge, Visitors Hostel
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- July 2008-December 2008 Member, Placement Cell
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- August 19, 2021 -till date Professor in-Charge, Placement Cell
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- August 6, 2019-August 13, 2021 Head, Mechanical Engineering Discipline
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- December 14, 2020-December 14, 2020 Chairman, Member, Procurement of Virtual Classroom Software
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- January 6, 2021-January 6, 2021 Member, Committee to conduct the Convocation 2021 (online)
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- May 2, 2018 -till date Nodal Faculty, International Affairs
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- August 10, 2020-August 10, 2020 Member, House Allotment Policy Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- September 9, 2019-September 9, 2019 Member, Committee for report submission to Peer Review Committee setup by MHRD to assess the performance of IIITs-CFTIs
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- November 11, 2021-November 11, 2021 Member, Director’s Gold Medal (for PhD students), Convocation 2021
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- July 12, 2018 -till date Coordinator, National Resource Center (NRC) for Design
Pandit Madan Mohan Malaviya National Mission on Teachers and Teaching (PMMMNMTT) (ARPIT) of Ministry of Human Resource Development (MHRD), Government of India
- October 29, 2018 -till date Institutional Coordinator, Scheme for Promotion and Research Collaboration (SPARC)
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- July 2018 -till date Faculty Mentor, Students Startup and Incubation Center
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- October 30, 2018 -August 6, 2019 President, MHRD Innovation Cell (MIC)
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- December 20, 2018 -August 6, 2019 Nodal Faculty / Single Point of Contact (SPOC), Smart India Hackathon 2019, AICTE
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- February 5, 2020-February 5, 2020 Member, Coordination Committee, Visit of Hon’ble Vice-President of India
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- July 23, 2020-August 10, 2020 Chairman, Committee for Allotment of Quarters to Institute employees
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- October 14, 2015-till date Member, Advisory Board of Mechanical Engineering
Marwadi Education Foundation’s Group of Institutions (MEFGI) Technical Campus, Rajkot, Gujrat
- - Member, Evaluation Committee of Principal Research Scientist
Centre for Product Design and Manufacturing at Indian Institute of Science (IISc) Bangalore for promotion to Chief Research Scientist
- - Member, AICTE Committee
Sant Longowal Institute of Technology, Longowal
- 30 November 2021-till date Member, Board of Studies
Mechanical Engineering Department, G H Raisoni College of Engineering, Nagpur
- February 19, 2019-till date Member, Board of Studies for Design
Delhi Technological University, Delhi
- October 1, 2018-till date Member, Academic Council
Avantika University, Ujjain, Madhya Pradesh, India
- - Member, Research Advisory Committee
Electronics and ICT Academy, PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur
- February 16, 2016-till date Member, Research Degree Committee (RDC) of Mechanical Engineering
Dr. APJ Abdul Kalam Technical University (AKTU), (Formerly UP Technical University), Lucknow, India
- 2017 -2019 Expert Member, Curriculum Development Committee
UG and PG programme in Industrial Design at NIT Rourkela
- September 21, 2021 -till date Chairman, Institute Ranking Committee
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- September 30, 2021 -till date Director, Technology Business Incubation Center
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- August 13, 2021-March 9, 2022 Head, Smart Manufacturing Discipline
PDPM Indian Institute of Information Technology, Design & Manufacturing, Jabalpur
- Honorary Rosalind Membership
London Journal Press, UK [Membership ID #RZ81700] [wef July 5, 2021]
- Research Paper titled: “Comparison of Heterogeneous Modeling Based Different Patterns of Hip Prosthesis Design” (Paper No.: ICCB_9) has been awarded “Certificate of Merit”
The International Conference on Computational Biology 2017, World Congress on Engineering and Computer Science (WCECS 2017), San Francisco, USA
- Awarded Second Prize in IMTEX - Indian Metal Forming Exhibition 2018
“Double Sided Incremental Forming” held during January 25-30, 2018 at Bengaluru, India (Organized by Indian Machine Tool Manufacturers’ Association)
- Awarded Second Consolation Prize in IMTEX 2017
“Electric Discharge Machining of Non-Conductive Ceramics” held during January 26-Febraruy 1, 2017 at Bengaluru, India (Organized by Indian Machine Tool Manufacturers’ Association)
- The most cited articles published since 2016
Research paper, “Product design concept evaluation using rough sets and VIKOR method”, Advanced Engineering Informatics, 2016, Vol. 30, pp. 16–25 doi:10.1016/j.aei.2015.11.005, The most cited articles published since 2016, extracted from Scopus, https://w
- Awarded First Prize in IMTEX Forming 2016
“Dieless Manufacturing” held during January 21-26, 2016 at Bengaluru, India (Organized by Indian Machine Tool Manufacturers’ Association)
- Guest of Honour
At the inaugural ceremony of the Short-term course on “CAD/CAM and Advanced Machining” at Motilal Nehru National Institute of Technology Allahabad, July 01, 2014
- Research Paper titled: “Design Process Automation Support through Knowledge Base Engineering” (Paper No.: ICCIIS_33) has been awarded “Certificate of Merit”
The 2013 International Conference of Computational Intelligence and Intelligent Systems, World Congress on Engineering 2013, London
- Top 10 Most Downloaded Articles -- July 2008, September 2008, March 2009
Research paper, “Geometric Modeling of Fluted Cutters”, ASME J. Comput. Inf. Sci. Eng., 2008, Vol. 8, Issue 2, pp. 021007-1-15
- The 4th most cited paper under Science Direct, hottest 25 articles, Computer Science, Computer-Aided Design, January to March 2009
Research paper “Three dimensional modeling and finite element simulation of a generic end mill”, Computer-Aided Design, 2009, Vol. 41, No. 2, pp. 106-114
- Chosen for 'Marquis Who's who in the World, 2007-08, 2008-09
- Chosen for 'Marquis Who's who in Science and Engineering', 2006-07, 2007-08, 2008-09
- Best Technical Paper Award 2000
For the paper, "Computer Aided Design and Development of Saddle Tree" presented at All India SDRC Users' Conference, October 9-11, 2000, Pune.
- Pro/User Award '99 for excellence in application of Pro/Engineer
PTC Inc., USA during All India PTC Users' Conference, 1999.
- Qualified "National Talent Search Examination' of Govt. of India
- Received 'National Cultural Talent Search Scholarship' from Govt. of India for Painting for the longest period in its record.
- Won various International/ National/ State/ University level prizes in Painting and other co-curricular activities.
- Won prizes at various levels in various Literary and Dramatics events
- Organized various inter and intra college/institute events
- Bagged merit certificates in various General Knowledge quizzes
- Represented college/ I.I.T./ School in Swimming, Water polo, Badminton, Basketball, Chess and other sports activities
- Certificate of Appreciation
2021
For Mentoring Ms. Rishika Kedia, IIITDM Jabalpur, India in the 2021 Taiwan International Student Design Competition held by the Ministry of Education, Taiwan
My courses
Current & Previous
| Course Code | Course name | Category | Institute |
|---|---|---|---|
| OE2M05 | Smart Manufacturing | UG/ | PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur |
| ME645 | Metal Forming | PG/PhD | PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur |
| SM1001 | Introduction to Profession (Smart Manufacturing) | UG/ | PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur |
| ME1001 | Introduction to Profession (Mechanical Engineering) | UG/ | PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur |
| OE2D11 | Design Thinking | UG/ | PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur |
Research
Areas or Specialisation / Project Activities / Publications / Books
Advanced Manufacturing & Product Design
- In-process monitoring of Stamping Process of a thin plate
Funding Agency: DST-JSPS under India-Japan Cooperative Science Programme (IJCSP); Grant: Rs. 18.60 lakhs; Period: 2017 to 2019
- Development of Adaptive Double Sided Incremental Forming Process for Dieless Manufacturing
Funding Agency: IMPRINT India (MHRD, DHI); Grant: Rs. 252.12 lakhs; Period: 2017 to 2022
- Process Development for the Fabrication of Free Form Components through Incremental Sheet Forming
Funding Agency: BRNS/DAE; Grant: Rs. 87.83 lakhs; Period: 2012 to 2017
- Design of a Frugal Laundry Solution
Funding Agency: DST-JSPS; Grant: Rs. 2.99 lakhs; Duration: 4 months
- Development of Additive-Subtractive Integrated RP System for Improved Part Quality
Funding Agency: DST/SERB; Grant: Rs. 19.50 lakhs; Period: 2014 to 2017
- Design of Stove / Chulha for Rural Masses of India
Funding Agency: MSMEs Design Clinic Grant: Rs. 1.5 Lakhs Duration: 4 months
- Development of a micro pump with NEMS sensing function for an automatic blood collecting and measurement system
Funding Agency: DST-JSPS; Grant: Rs. 4.38 lakhs; Duration: 2 years
- Geometric Modeling, Analysis and Design for Generic Definitions of Custom-Engineered Cutting Tools
Funding Agency: DST; Grant: Rs. 25.26 lakhs; Period: 2008 to 2012
- Development of Virtual Laboratory on Automated systems (Mechatronics) supported by National Mission for Education through ICT (NMEICT)
Funding Agency: MHRD; Grant: Rs. 40 lakhs; Period: NA
- Development of Virtual Laboratory on Manufacturing supported by National Mission for Education through ICT (NMEICT)
Funding Agency: MHRD; Grant: Rs. 40 lakhs; Period: NA
- Geometric Modeling of Cutting Tools using Reverse Engineering at IIT Kanpur
Funding Agency: DST; Grant: Rs. 11 lakhs; Period: 2000 to 2003
- Development of Integrated CAD/CAM Lab at N.I.T. Kurukshetra
Funding from World Bank (TECHAID IV)
- Integration of Design and Analysis Phase in Product Development Cycle
Funding Agency: MHRD; Grant: Rs. 15 lakhs; Period: NA
- Tracking and Analysis of Metro Bus Service of Jabalpur City Transport Services Ltd. (JCTSL)
Funding Agency: District Administration, Jabalpur; Grant: Rs. 1.5 lakhs; Period: 2008 to 2009
- Scale effect approach to evaluate the erosion mechanism and performance features in micro AWJM process: A study of new approach based on process parameters and materials microstructures
Role: Mentor Funding Agency: SERB TARE (Teachers Associateship For Research Excellence); Grant: Rs. 18.30 Lakhs; Period: 36 months [Sanctioned on 18 November 2020]
- Additive Manufacturing and Internet of Things based Flexible Healthcare and Effective Pandemic Management (ongoing)
Funding Agency: DST-NSTMIS; Grant: Rs. 26.59 Lakhs; Co-PIs: Prof. V.K. Gupta and Dr. P. Khanna Period: 2023-2026
- Numerical modeling and development of new methods for hybrid metal forming of complex parts of ultra-high strength (UHS) materials
Funding Agency: Department of Science & Technology; Grant: Rs. 19.64 Lakhs; Period: 2019-2021
- Development of Induction-Conduction Based Material Deposition System for Metal Additive Manufacturing
Role: Co-Principal Investigator Funding Agency: Department of Science & Technology; Grant: Rs. 42.34 Lakhs; Period: 2018-2021
- Center for Excellence in the field of Smart Manufacturing and Condition Monitoring
Funding Agency: Department of Science & Technology (FIST Scheme); Grant: Rs. 42.34 Lakhs; Period: 2018-2021
- National Resource Center (NRC) for Design
Role: Coordinator; Funding Agency: Ministry of Human Resource Development (MHRD); Grant: Rs. 19.70 Lakhs; Period: 2018-2020
- Development of low weight nanostructured Functionally Graded Materials for high strength applications by hybrid asymmetric rolling and incremental forming methods (ongoing)
Funding Agency: Department of Science & Technology (DST); Grant: Rs. 47.73 Lakhs; Period: 2023-2026
- Development of low-cost 3D printing technology for personalized nutritious food preparation (ongoing)
Funding Agency: Science and Engineering Research Board (SERB) - Core Research Grant (CRG); Co-PI: Dr. K. Ponappa; Grant: Rs. 44.55 Lakhs; Period: 2023-2026
- Portable and Minimally Invasive Device to treat Pneumothorax, Hydropneumothorax and Hemothorax
Mentor Funding Agency: Biotechnology Industry Research Assistance Council (BIRAC); PI: Yogesh Kumar Bhanu; Grant: Rs. 43.37 Lakhs; Period: 2023-24
1. Cutting Tool Geometry: 3D Perspective, Published by LAP Lambert Academic Publishing GmbH & Co., KG, Germany, 2011 [ISBN 978-3-8465-2878-5]
2. Pesin A.M., Chukin M.V., Drigun E.M., Tandon, P., Pustovoitov D.O., Chikishev, D.N., Lokotunina, N.M. and Pesin I.A., 2018. On the possibility of the production of machine-building products on a plate mill. Magnitogorsk: Magnitogorsk Publishing House. NMSTU, 2018. 128 p. (In Russian) The Studies were carried out as part of DST-RFBR grant (INT/RUS/RFBR/P-349 dated 02-01-2019)
Book Chapter:
1. Kausadikar, S., Tiwari, M.K, Ponappa, K. and Tandon, P., 2023. Design and analysis of Single Screw Extruder for Hybrid Manufacturing Process. In: Advances in Manufacturing, Automation, Design and Energy Technologies (Chapter 41). Eds: N. M. Sivaram et al., Lecture notes of Mechanical Engineering, Springer Nature. ISBN 978-981-99-1287-2
2. Shrivastava, P. and Tandon, P., 2022, A Review on Process Limitations and Recent Advancements in Single Point Incremental Sheet Forming, In: Metal Forming Processes. Eds: Kakandikar, G. M., Agrawal, A., Kumar, D. R., CRC Press, Boca Raton. eBook ISBN9781003226703. DOI: 10.1201/9781003226703
3. Gohil, Y. and Tandon, P., 2022, Quantitative and Qualitative Study on Lifestyle of Polycystic Ovarian Syndrome or Disease (PCOS/PCOD) Patients, In: Ergonomics for Design and Innovation. HWWE 2017. Chakrabarti, D., Karmakar, S., Salve, U.R. (eds). Lecture Notes in Networks and Systems, vol 391, pp175-184. Springer, Cham. DOI: 10.1007/978-3-030-94277-9_16
4. Sahu, A., Jain, P.K., and Tandon, P., 2022, Toolpath Generation of a Human Anatomical Shape for Double-Sided Incremental Forming, In: Recent Advances in Operations Management Applications. Lecture Notes in Mechanical Engineering, Eds: Sachdeva, A., Kumar, P., Yadav, O.P., Tyagi, M., Springer, Singapore. DOI: 10.1007/978-981-16-7059-6_23
5. Telang, V.S., Pemmada, R., Ramakrishna, S., Tandon, P. and Nanda, H.S., 2022. Overview of Current Additive Manufacturing Technologies for Titanium Bioimplants. In: Nanoscale Engineering of Biomaterials: Properties and Applications, Eds: Lalit M. Pandey and Abshar Hasan, Springer, Chapter 5, pp.117-130 ISBN 978-981-16-3666-0 ISBN 978-981-16-3667-7 (eBook) DOI: 10.1007/978-981-16-3667-7
6. Pemmada, R., Telang, V.S., Dash, M., Richard, J.L.C., Tandon, P., Ramakrishna, S. and Nanda, H.S., 2022. 3D Printing for Functional Tissue Engineering. In: Tissue Engineering: Current Status and Challenges, Eds: Chandra P Sharma, Thomas Chandy, Vinoy Thomas and Finosh G Thankam, Academic Press, Elsevier, Chapter 17, pp. 415-430. ISBN 978-0-12-824064-9, eBook ISBN: 9780128240656 [Available online 28 January 2022] DOI: 10.1016/C2020-0-01183-7
7. Pesin, A., Tandon, P., Pustovoytov, D., Korchunov, A., Pesin. I. and Dubey, A., 2020. Numerical modelling and development of new technical solutions in metallurgy and material processing, In: Edited by: Pesin A. Ito M. (Eds) Solid State Phenomena 304. ISSN: 1662-9779, 2020, pp.113-119. Online since: May 2020 doi:10.4028/www.scientific.net/SSP.304
8. Shrivastava, P. and Tandon, P., 2020. Deformation-Induced Surface Roughness and Global Spring Back Resulted with Different Plastic Strain Levels in Incremental Forming of Original and Preheated Sheet Samples. In: Gupta V., Varde P., Kankar P., Joshi N. (Eds) Reliability and Risk Assessment in Engineering. Lecture Notes in Mechanical Engineering. Springer, Singapore. doi.org/10.1007/978-981-15-3746-2_43. First Online: 09 May 2020. Print ISBN: 978-981-15-3745-5, Online ISBN: 978-981-15-3746-2
9. Dayam, S., Priyadarshi, S. and Tandon, P., 2020. Simulation of Extrusion of Thermoplastic Binder in Additive Manufacturing Process. In: Shunmugam M., Kanthababu M. (Eds) Advances in Additive Manufacturing and Joining (Chapter 28, pp.319-328). Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. doi:10.1007/978-981-32-9433-2_28
10. Dabholkar, A.P., Pande, S. and Tandon, P., 2019, Design Toolkit for Sustainable Ideation. In: Ambrosio M., Vezzoli C. (Eds.), Designing Sustainability for All – Proc. 3rd LeNS world distributed conference, Vol. 2, pp. 296–300, Milano, Mexico City, Beijing, Bangalore, Curitiba, Cape Town (http://lensconference3.org/images/program/VOLUME2.pdf)103
11. Tiwari, V., Jain, P.K. and Tandon, P., 2019. Bio-inspired Knowledge Representation Framework for Decision Making in Product Design. In: Shunmugam M., Kanthababu M. (eds) Advances in Forming, Machining and Automation. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore. doi: 10.1007/978-981-32-9417-2_48. Print ISBN: 978-981-32-9416-5, Online ISBN: 978-981-32-9417-2
12. Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2019. Toolpath Generation for Additive Manufacturing Using CNC Milling Machine. In 3D Printing and Additive Manufacturing Technologies (pp. 73-82). Springer, Singapore.
13. Vispute, M., Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2019. On the Surface Finish Improvement through Hybrid Additive Subtractive Manufacturing Process. In: Innovative Design, Analysis and Development Practices in Aerospace and Automotive Engineering (I-DAD 2018), (pp.443-449). Springer, Singapore.
14. Dwivedi, D., Kumar, A., Priyadarshi, S., Jain, P.K. and Tandon, P., 2018. Numerical prediction of fracture in parts formed with incremental sheet forming process. In Simulations for Design and Manufacturing (Vol. 2, pp. 173-194). Springer, Singapore. doi: https://doi.org/10.1007/978-981-10-8518-5_6
15. Khan, A. and Tandon, P., 2017, January. Closing the Loop: ‘Systems Perspective’ for the Design of Food Packaging to Facilitate Material Recovery. In International Conference on Research into Design (Vol. 2, pp. 349-359). Springer, Singapore. doi:10.1007/978-981-10-3521-0_30
16. Kumar, P. and Tandon, P., 2017, January. Improvised Concept Development Process in Design Through Product Ingredients. In International Conference on Research into Design (Vol. 2, pp. 453-463). Springer, Singapore. doi:10.1007/978-981-10-3521-0_39
17. Shaikh, S., Kumar, N., Jain, P.K. and Tandon, P., 2016. Hilbert curve based toolpath for FDM process. In CAD/CAM, Robotics and Factories of the Future (pp. 751-759). Springer, New Delhi. ISBN: 978-81-322-2738-0 (Print); ISBN 978-81-322-2740-3 (Electronic)
18. Panjwani, D., Jain, P. K., Samal, M. K., Roy, J. J., Roy, D. and Tandon, P., 2016. Single Point Incremental Forming Using Flexible Die. In CAD/CAM, Robotics and Factories of the Future (pp. 741-749). Springer, New Delhi. ISBN: 978-81-322-2738-0 (Print); ISBN 978-81-322-2740-3 (Electronic)
19. Khan, M.R. and Tandon, P., 2013. Development of the Geometry and its Redesigning for a Special Shaped Milling Cutter, In Proceedings of The World Congress on Engineering 2013, (Vol. 1, pp.526-531). ISBN: 978-988-19251-0-7
20. Tiwari, V., Jain, P.K. and Tandon, P., 2013. Design Process Automation Support through Knowledge Base Engineering. In Proceedings of the World Congress on Engineering (Vol. 2, pp. 737-742). ISBN: 978-988-19252-8-2
- Nagargoje, A., Kankar, P.K., Jain, P.K. and Tandon, P., 2021. Application of artificial intelligence techniques in incremental forming: a state-of-the-art review. Journal of Intelligent Manufacturing, pp.1-18. DOI: 10.1007/s10845-021-01868-y
- Natarajan, Y., Raj, K.L. and Tandon, P., 2023. Measurement and analysis of pocket milling features in abrasive water jet machining of Ti-6Al-4V alloy. Archives of Civil and Mechanical Engineering, 23(1), pp.1-16. DOI: 10.1007/s43452-022-00578-3
- Patil, I.G., Shahare, H.Y., Bhandarkar, V.V. and Tandon, P., 2023. Numerical Study of Non-Newtonian Ceramic Slurry Flow in Extrusion-based Additive Manufacturing. In: CAD Conference and Exhibition (CAD’23), Mexico City, Mexico, 10 - 12 July 2023. [Ref. # CAD23-005]
- Rajak, S.K., Kumar D., Seetharam R. and Tandon P., 2023. Mechanical and sliding wear analysis of Porcelain reinforced SAE660 Bronze bearing alloy composite fabricated by stir casting method. Materials Today: Proceedings. [Accepted on 27-04-2023]
- Tiwari, V., Khanna, P. and Tandon, P., 2023. Capturing Design Intent during concept evaluation using rough numbers and TODIM Method. In: CAD Conference and Exhibition (CAD’23), Mexico City, Mexico, 10 - 12 July 2023. [Ref. # CAD23-008]
- Pawar, K., Telang, V., Shahare, H.Y. and Tandon, P., 2023. Numerical Analysis of Progressive Cavity Pump Extruder for 3D Printing of High Viscosity Ceramic Paste. In: CAD Conference and Exhibition (CAD’23), Mexico City, Mexico, 10 - 12 July 2023. [Ref. # CAD23-003]
- Sahu, A., Nagargoje, A. and Tandon, P., 2022. Feature Segmentation of Multifeatured Freeform Geometries for Incremental Sheet Forming. Digital Manufacturing Technology, pp.65-77. DOI: 10.37256/dmt.2220221859
- Mandaloi, G., Nagargoje, A.R., Mall, A.P., Gupta, A.K., Tiwari, M.K., Dubey, A.K. and Tandon, P., 2022. Feature-based double-sided deformation machining approach for manufacturing freeform monolithic components. The International Journal of Advanced Manufacturing Technology, pp.1-15. DOI: 10.1007/s00170-022-10295-z
- Mandaloi, G., Nagargoje, A., Banerjee, G., Gupta, A. and Tandon, P., 2022. Assessment of response parameters of the bending mode of deformation machining for manufacturing of impeller blades. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 44(11), p.523. DOI: 10.1007/s40430-022-03811-5
- Raj, K.N., Yuvaraj, N. and Tandon, P., 2022. Insights On Abrasive Water jet Milling of Blind Pockets. Surface Review and Letters (SRL), 29(11), pp.1-17. DOI: 10.1142/S0218625X23300010
- Gupta, A.K., Priyadarshi, S., Pustovoytov, D., Dabala, M., Yu, H., Pesin, A. and Tandon, P., 2022. Effects of heat treatment on the surface quality and improvement in formability of deformation machined products of Al 6061. Journal of Manufacturing Science and Engineering, 144(12), p.124501. DOI: 10.1115/1.4054991
- Gupta, A.K., Shahare, H., Kumar, P., Dubey, A.K., Pustovoytov, D., Yu, H., Pesin, A. and Tandon, P., 2022. Effect of tool path strategy and tooltip profile on geometrical feature and surface quality of Al-6061 alloy during deformation machining in bending mode. Advances in Materials and Processing Technologies, pp.1-18. DOI: 10.1080/2374068X.2022.2091835
- Mandaloi, G., Nagargoje, A., Gupta, A.K., Banerjee, G., Shahare, H.Y. and Tandon, P., 2022. A comprehensive review on experimental conditions, strategies, performance, and applications of incremental forming for deformation machining. Journal of Manufacturing Science and Engineering, 144(11), p.110802. DOI: 10.1115/1.4054683
- Vasudevan, B., Natarajan, Y., Sivalingam, V., Krolczyk, G. and Tandon, P., 2022. Insights into drilling film cooling holes on ceramic-coated nickel-based superalloys. Archives of Civil and Mechanical Engineering, 22(3), p.141. DOI: 10.1007/s43452-022-00465-x
- Dayam, S., Tandon, P. and Priyadarshi, S., 2022. Development of paste extrusion-based metal additive manufacturing process. Rapid Prototyping Journal, (ahead-of-print). DOI: 10.1108/RPJ-05-2021-0118
- Soni, R., Ponappa, K. and Tandon, P., 2022. A review on customized food fabrication process using Food Layered Manufacturing. LWT, 161, p.113411. DOI: 10.1016/j.lwt.2022.113411
- Kumar, P., Priyadarshi, S. and Tandon, P., 2022. Investigating the incremental forming capabilities of extra deep drawn steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(5), pp.2352-2362. DOI: 10.1177/09544062211027201
- Singh, S.A., Priyadarshi, S. and Tandon, P., 2021. Comparative study of incremental forming and elevated temperature incremental forming through experimental investigations on AA 1050 sheet. Journal of Manufacturing Science and Engineering, 143(6). DOI: 10.1504/IJMR.2023.10046604
- Sharma, M., Gupta, V.K. and Tandon, P., 2022. Numerical analysis of the effects of ultrasonic vibrations and elevated temperature in incremental sheet forming. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(15), pp.8497-8507. DOI: 10.1177/09544062221085907
- Kumar, P. and Tandon, P., 2022. Investigating the capability of the Lemaitre damage model to establish the incremental sheet forming process. Archives of Civil and Mechanical Engineering, 22(2), p.66. DOI: 10.1007/s43452-022-00391-y
- Wu, Y.Z., Zhang, Z.Y., Juan, L.I.U., Charlie, K.O.N.G., Yu, W.A.N.G., Tandon, P., Pesin, A. and Yu, H.L., 2022. Preparation of high-mechanical-property medium-entropy CrCoNi alloy by asymmetric cryorolling. Transactions of Nonferrous Metals Society of China, 32(5), pp.1559-1574. DOI: 10.1016/S1003-6326(22)65893-X
- Shahare, H.Y., Dubey, A.K., Kumar, P., Yu, H., Pesin, A., Pustovoytov, D. and Tandon, P., 2021. A comparative investigation of conventional and hammering-assisted incremental sheet forming processes for AA1050 H14 sheets. Metals, 11(11), p.1862. DOI: 10.3390/met11111862
- Kumar, P. and Tandon, P., 2022. Design decision in the manufacturing environment using an improved multiple-criteria performance evaluation method. Arabian Journal for Science and Engineering, 47(3), pp.1-12. DOI: 10.1007/s13369-021-06049-w
- Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2022. Numerical and experimental analysis of heat transfer in inductive conduction based wire metal deposition process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(5), pp.2395-2407. DOI: 10.1177/09544062211028267
- Kumar, P. and Tandon, P., 2022. Design decision in the manufacturing environment using an improved multiple-criteria performance evaluation method. Arabian Journal for Science and Engineering, 47(3), pp.1-12. DOI: 10.1007/s13369-021-06049-w
- Bedarkar H., Gupta A., Seetharam R. and Tandon P., 2022. Effect of Incremental Sheet Forming Process Parameters on Surface Roughness in Inconel 625 Sheets. In: 13th Symposium on Plasticity and Impact Mechanics (IMPLAST-2022), IIT Madras, Chennai, India, 21-26 August 2022.
- Rajak, S.K., Kumar D., Seetharam R. and Tandon P., 2022. Mechanical and sliding wear analysis of Porcelain reinforced SAE660 Bronze bearing alloy composite fabricated by stir casting method. In: 13th Symposium on Plasticity and Impact Mechanics (IMPLAST-2022), IIT Madras, Chennai, India, 21-26 August 2022.
- Gupta, A., Nagargoje, A., Dubey, A.K. and Tandon, P., 2022. A Numerical Investigation to Compare Point Cloud and STL based Toolpath Strategies for 5-Axis Incremental Sheet Forming. In: ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022) (Track: Advanced Manufacturing), Columbus, OH, USA, 30 October – 3 November 2022.
- Bhandarkar, V.V., Patil, I.G., Shahare, H.Y. and Tandon, P., 2022. Understanding the Influence of Process Parameters for Minimizing Defects in 3D Printed Parts Through Remote Monitoring. In: ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022) (Track: Advanced Manufacturing), Columbus, OH, USA, 30 October – 3 November 2022.
- Li, J., Gao, H., Kong, C., Tandon, P., Pesin, A. and Yu, H., 2021. Mechanical properties and thermal stability of gradient structured Zr via cyclic skin-pass cryorolling. Materials Letters, 302, p.130406. DOI: 10.1016/j.matlet.2021.130406
- Dubey, A.K., Shahare, H.Y., Pesin, A., Pustovoytov, D., Yu, H. and Tandon, P., 2021, November. Numerical Modeling of a Hybrid Asymmetric Rolling and Bending Process. In ASME International Mechanical Engineering Congress and Exposition (Vol. 85550, p. V02AT02A064). American Society of Mechanical Engineers. DOI: 10.1115/IMECE2021-69553
- Nagargoje, A., Kankar, P.K., Jain, P.K. and Tandon, P., 2021, November. Comparison of clustering techniques for feature-based toolpath generation in dieless manufacturing. In ASME International Mechanical Engineering Congress and Exposition (Vol. 85567, p. V02BT02A013). American Society of Mechanical Engineers. DOI: 10.1115/IMECE2021-70255
- Kumar, P., Priyadarshi, S. and Tandon, P., 2022. Investigating the incremental forming capabilities of extra deep drawn steel. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(5), pp.2352-2362. DOI: 10.1177/09544062211027201
- Pustovoytov, D., Pesin, A. and Tandon, P., 2021. Asymmetric (hot, warm, cold, cryo) rolling of light alloys: a review. Metals, 11(6), p.956. DOI: 10.3390/met11060956
- Wang, L., Kong, C., Tandon, P., Pesin, A., Pustovoytov, D. and Yu, H., 2021. Effect of Rolling Temperature and Subsequence Ageing on the Mechanical Properties and Microstructure Evolution of an Al-Cu-Li Alloy. Metals, 11(6), p.853. DOI: 10.3390/met11060853
- Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2021. Analysis of novel induction heating extruder for additive manufacturing using aluminum filament. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(12), pp.1961-1970. DOI: 10.1177/09544054211014451
- Amar, A.K. and Tandon, P., 2021. Investigation of gelatin enabled abrasive water slurry jet machining (AWSJM). CIRP Journal of Manufacturing Science and Technology, 33, pp.1-14. DOI: 10.1016/j.cirpj.2021.02.005
- Kumar, P. and Tandon, P., 2021. Process Capabilities of Commercially Pure Titanium Grade 2 formed through Warm Incremental Sheet Forming. Proc. IMechE Part B: Journal of Engineering Manufacture, , DOI:10.1177/0954405421995669
- Nagargoje, A., Kankar, P.K., Jain, P.K. and Tandon, P., 2021. Performance evaluation of the data clustering techniques and cluster validity indices for efficient toolpath development for Incremental Sheet Forming. ASME Journal of Computing and Information Science in Engineering, 21, pp.031001-1-11. DOI:10.1115/1.4048914
- Telang, V.S., Pemmada, R., Thomas, V., Ramakrishna, S., Tandon, P. and Nanda, H.S., 2021. Harnessing Additive Manufacturing for Magnesium Based Metallic Bioimplants: Recent Advances and Future Perspectives, Current Opinion in Biomedical Engineering. 17, pp.100264 DOI: 10.1016/j.cobme.2021.100264
- Singh, S.A., Priyadarshi, S. and Tandon, P., 2021. Exploration of appropriate Tool Material and Lubricant for Elevated Temperature Incremental Forming of Aluminium Alloy. International Journal of Precision Engineering and Manufacturing, 22(2), 217-225 DOI: 10.1007/s12541-020-00447-0
- Singh, S.A., Priyadarshi, S. and Tandon, P., 2021. Comparative study of Incremental Forming and Elevated Temperature Incremental Forming through Experimental Investigations on AA 1050 sheet. ASME Journal of Manufacturing Science and Engineering, 143(6), pp.064501-1-7. DOI:10.1115/1.4049093
- Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2021, CFD analysis in a heating bed with two inlet and one outlet cooling configuration for application in AM process, Materials Today: Proceedings, DOI: 10.1016/j.matpr.2020.11.224
- Kumar, P., Shahare, H.Y. and Tandon P., 2021. Identification of Isotropic Hardening Law Parameters of AL1050 H14 Sheet for simulation of metal forming processes, In: 2nd International Conference on Industrial and Manufacturing Systems (CIMS-2021), Dr. B R Ambedkar National Institute of Technology, Jalandhar and Punjab Engineering College (PEC), Chandigarh, 11-13 November 2021 [CIMS_ 114] [Accepted on 9 September 2021]
- Gupta A.K., Shahare H.Y., Kumar P., Pustovoytov D., Yu H., Pesin A. and Tandon, P., 2021. Comparative Analysis of Surface Quality and Geometrical Feature for Deformation Machining in Bending Mode. In: 2nd International Conference on Industrial and Manufacturing Systems (CIMS-2021), Dr. B R Ambedkar National Institute of Technology, Jalandhar and Punjab Engineering College (PEC), Chandigarh, 11-13 November 2021 [CIMS_ 265] [Accepted on 4 October 2021]
- Gohil, Y. and Tandon, P., 2021, Quantitative and Qualitative Study on Lifestyle of Polycystic Ovarian Syndrome or Disease (PCOS/PCOD) Patients, In: 19th International Conference on "Humanizing Work and Work Environment" HWWE 2021, Indian Institute of Technology, Guwahati, December 1-3, 2021. [Ref. No. 073] [Accepted on 4 October 2021]
- Bhandarkar, V.P. and Tandon, P., 2021, A Review on Recent Techniques and Current Challenges in identifying defects in Additively Manufactured Metal Components, In: 5th International and 20th National Conference on Machines and Mechanisms (iNaCoMM 2021), PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, 9-11 December 2021. [Accepted on 8 September 2021]
- Mall, A.P. and Tandon, P., 2021, Design and Development of Heterogeneous Porous Scaffold - A Review, In: 5th International and 20th National Conference on Machines and Mechanisms (iNaCoMM 2021), PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, 9-11 December 2021. [Accepted on 8 September 2021]
- Kausadikar, S., Tiwari, M.K, Ponappa, K. and Tandon, P., 2021. Design and analysis of innovative single screw extruder for hybrid manufacturing process. In: 2nd International Conference on Future Technologies 2021 (ICOFT 2021) in Manufacturing, Automation, Design and Energy (MADE 2.0), National Institute of Technology Puducherry, 16-18 December 2021. [To be published in "Lecture notes of Mechanical Engineering", Springer Nature on 17 January 2022]
- Nagargoje, A., Kankar, P.K., Jain, P.K. and Tandon, P., 2021., Comparison of Clustering Techniques for Feature-Based Toolpath Generation in Dieless Manufacturing, In: ASME International Mechanical Engineering Congress & Exposition IMECE202I, Virtual Conference, Online, November 1-5, 2021. [Ref. No. IMECE2021-70255] [Accepted on 08-07-2021]
- Dubey, A.K., Shahare, H.S., Pesin, A., Yu, H., Pustovoytov D. and Tandon, P., 2021, Numerical Modeling of a Hybrid Asymmetric Rolling and Bending Process, In: ASME International Mechanical Engineering Congress & Exposition IMECE202I, Virtual Conference, Online, November 1-5, 2021. [Ref. No. IMECE2021- 69553] [Accepted on 11-07-2021]
- Singh, R. and Tandon, P., 2020. An approach to enhance product universality using vague numbers during initial design phase. In: 23rd International Conference on Engineering Design (ICED), Gothenburg, Sweden August 2021. [Accepted] [Submitted on 10 December 2020]
- Mishra, A., Singh, R. and Tandon, P., 2020. Ergonomics Risk Factor among Hairdressers Working in India: A Case Study. Ergonomics International Journal, 4(4): 000252. doi:10.23880/eoij-16000252
- Sharma, G., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2020. On the suitability of induction heating system for metal additive manufacturing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 235(1-2), pp.219-229. DOI:10.1177/0954405420937854
- Bhatta, L., Pesin, A., Zhilayaev, A.P., Tandon, P., Kong, C., Yu, H., 2020, Recent Development of Superplasticity in Aluminum Alloys: A Review, Metals, 10(1), 77; doi:10.3390/met10010077
- Shahare, H.S., Rajput, R. and Tandon, P., 2020, Investigation of Contact Conditions During Stamping of a Thin Plate, In: ASME International Mechanical Engineering Congress & Exposition 2020MECE, Portland, Oregon, USA, November 16 – 19, 2020. [Ref. No. 123615] [Presented by Puneet Tandon on Tuesday, 17 November 2020]
- Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2020. CFD analysis in a heating bed with two inlet and one outlet cooling configuration for application in AM process. Submitted to EMSME 2020: 1st International Conference on Energy, Materials Sciences & Mechanical Engineering - 2020, National Institute of Technology Delhi, New Delhi, India, 30 October - 1 November 2020. India [Presented by Gourav K. Sharma on Saturday, 31 October 2020] Published in Materials Today: Proceedings
- Sahu, A., Jain, P.K., and Tandon, P., 2020, Toolpath Generation of a Human Anatomical Shape for Double-Sided Incremental Forming, In: International Conference on Industrial and Manufacturing Systems (CIMS-2020), Dr B R Ambedkar National Institute of Technology Jalandhar, INDIA, 9-11 October, 2020 [Ref. No. 322] [Presented by Akshay Sahu on Saturday, 10 October 2020]
- Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2020. Thermal and fluid flow modelling of a heating bed for application in metal AM process. In: RAME-2020: 2nd International Conference on Recent Advances in Mechanical Engineering, Delhi Technological University, Delhi. India, 18-19 September 2020. Paper No.: 151 [Presented by Gourav K. Sharma on Friday, 18 September 2020]
- Pesin, A., Pustovoytov, D., Yu, H. and Tandon, P., 2020. Development of theory and technologies for hybrid metal forming processes, In: The 13th International Conference on the Technology of Plasticity (ICTP 2020), The Ohio State University, Ohio Union, Columbus, Ohio, USA, 26-31 July 2020. [Accepted] [Paper ID: F2-011]
- Pustovoytov, D., Pesin, A., Zhilyaev A. and Tandon, P., 2020. FEM simulation of strain gradient in low-carbon steel sheets after asymmetric cold rolling. In: The 5th International Youth Scientific and Technical Conference, Magnitogorsk Rolling Practice 2020, NMSTU, Magnitogorsk, Russia, 24-27 November 2020, pp. 24-26.
- Dubey, A.K., Shahare, H.Y., Pesin, A., Pustovoytov, D., Yu, H. and Tandon, P., 2020. Numerical modeling of combined asymmetric rolling and bending process. In: The 5th International Youth Scientific and Technical Conference, Magnitogorsk Rolling Practice 2020, NMSTU, Magnitogorsk, Russia, 24-27 November 2020, pp. 51-52.
- Kozhemyakina, A., Pesin, A., Tandon, P., Pustovoytov, D., Biryukova, O, Ilina, N., Dubey, A.K. and Shahare, H.Y., 2020. Development of the asymmetric rolling technology as a severe plastic deformation method for narrow aluminum strips with a gradient structure showing higher strength and ductility. In: The 5th International Youth Scientific and Technical Conference, Magnitogorsk Rolling Practice 2020, NMSTU, Magnitogorsk, Russia, 24-27 November 2020, pp. 71-72.
- Shahare, H.Y., Rajput, R. and Tandon, P., 2020, Investigation of Contact Conditions During Stamping of a Thin Plate, In: ASME International Mechanical Engineering Congress & Exposition 2020MECE, Portland, Oregon, USA, November 16 – 19, 2020. [Ref. No. 123615] [Presented by Puneet Tandon on Tuesday, 17 November 2020]
- Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2020. CFD analysis in a heating bed with two inlet and one outlet cooling configuration for application in AM process. Submitted to EMSME 2020: 1st International Conference on Energy, Materials Sciences & Mechanical Engineering - 2020, National Institute of Technology Delhi, New Delhi, India, 30 October - 1 November 2020. India [Presented by Gourav K. Sharma on Saturday, 31 October 2020] Published in Materials Today: Proceedings
- Sahu, A., Jain, P.K., and Tandon, P., 2020, Toolpath Generation of a Human Anatomical Shape for Double-Sided Incremental Forming, In: International Conference on Industrial and Manufacturing Systems (CIMS-2020), Dr B R Ambedkar National Institute of Technology Jalandhar, INDIA, 9-11 October 2020 [Ref. No. 322] [Presented by Akshay Sahu on Saturday, 10 October 2020]
- Sharma, G.K., Pant, P., Jain, P.K., Kankar, P.K. and Tandon, P., 2020. Thermal and fluid flow modelling of a heating bed for application in metal AM process. In: RAME-2020: 2nd International Conference on Recent Advances in Mechanical Engineering, Delhi Technological University, Delhi. India, 18-19 September 2020. Paper No.: 151 [Presented by Gourav K. Sharma on Friday, 18 September 2020]
- Pesin, A., Pustovoytov, D., Yu, H. and Tandon, P., 2020. Development of theory and technologies for hybrid metal forming processes, In: The 13th International Conference on the Technology of Plasticity (ICTP 2020), The Ohio State University, Ohio Union, Columbus, Ohio, USA, 26-31 July 2020. [Accepted] [Paper ID: F2-011]
- Lakhera, S., Priyadarshi, S. and Tandon, P., 2020. Post-Processing of Metal Additive Manufactured Parts through Ring Rolling. In: Horváth I., Keenaghan G. (Eds) Proceedings of Thirteenth International Tools and Methods of Competitive Engineering Symposium (TMCE 2020), Dublin, Ireland, 11-15 May 2020. TMCE 2020 Repository, pp.613-623. tmce.io.tudelft.nl/proceedings ISBN/EAN: 978-94-6384-131-3
- Lakhera, S., Priyadarshi, S. and Tandon, P., 2020. Post-Processing of Metal Additive Manufactured Parts through Ring Rolling. In: Horváth I., Keenaghan G. (Eds) Proceedings of Thirteenth International Tools and Methods of Competitive Engineering Symposium (TMCE 2020), Dublin, Ireland, 11-15 May 2020. TMCE 2020 Repository, pp.613-623. tmce.io.tudelft.nl/proceedings ISBN/EAN: 978-94-6384-131-3
- Singh, S.A., Priyadarshi, S. and Tandon, P., 2019. Investigations on the Influence of heat on AA1050 sheet during Incremental Forming. Letters on Materials, 9(4s), pp.523-527. doi: 10.22226/2410-3535-2019-4-523-527
- Deokar, S.U., Jain, P.K., Tandon, P. and Pathak, A., 2019. Analysis of Springback and Force behavior in Single Point Incremental Sheet Forming though FEA. Material Today: Proceedings, 18(7), pp. 3330-3339. doi:/10.1016/j.matpr.2019.07.254
- Shrivastava, P. and Tandon, P., 2019. Microstructure and texture based analysis of forming behavior and deformation mechanism of AA1050 sheet during Single Point Incremental Forming. Journal of Materials Processing Technology, 266, pp.292-310. doi: 10.1016/j.jmatprotec.2018.11.012
- Shrivastava, P. and Tandon, P. 2019. Effect of preheated microstructure vis-à-vis process parameters and characterization of orange peel in incremental forming. Journal of Materials Engineering and Performance, pp.1-13. doi: 10.1007/s11665-019-04032-z
- Tiwari, V., Jain, P.K. and Tandon, P., 2019. An integrated Shannon entropy and TOPSIS for product design concept evaluation based on bijective soft set. Journal of Intelligent Manufacturing, 30(4), pp.1645-58. doi:10.1007/s10845-017-1346-y
- Kumar, P. and Tandon, P., 2019. A paradigm for customer-driven product design approach using extended axiomatic design. Journal of Intelligent Manufacturing, 30(2), pp.589-603. doi:10.1007/s10845-016-1266-2
- Kumar, N., Jain, P.K., Tandon, Puneet and Pandey, P.M., “Investigations on the melt flow behavior of aluminium filled ABS polymer composite for fused deposition modeling", International Journal of Materials and Product Technology (IJMPT). [Accepted]
- Nagargoje, A., Kankar, P.K., Jain, P.K and Tandon, P., 2019. Prediction of Thickness Profile of Axisymmetric Conical Part in Single Point Incremental Forming, In: International Conference on Precision, Meso, Micro and Nano Engineering (COPEN 2019), IIT Indore, 12-14 December 2019. [Presented by A. Nagargoje]
- Pesin, A., Tandon, P., Pustovoytov, D., Korchunov, A., Pesin. I. and Dubey, A., 2019. Numerical modelling and development of new technical solutions in metallurgy and material processing, In: 2019 The 4th International Conference on Functional Materials and Metallurgy, Osaka, Japan, 27-30 November 2019, Solid State Phenomena Submitted: 2019-12-07, 304, ISSN: 1662-9779, 2020 Trans Tech Publications Ltd, Switzerland Online: 2020-05-19, pp.113-119. [Presented by A. Pesin]
- Priyadarshi, S., Singh, S.A., Kumar, P. and Tandon, P., 2019. An Approach to Improve Thickness Distribution and Formability in Incremental Sheet Forming Process through improvised Blank Design. In: NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, New Hampshire, USA, 23-27 June 2019. [Presented by Puneet Tandon]
- Shrivastava, P. and Tandon, P., 2019. Revisiting micro-mechanical damage characterization for Single Point Incremental Forming process. In: NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes, Portsmouth, New Hampshire, USA, 23-27 June 2019. [Presented by Puneet Tandon]
- Shrivastava, P. and Tandon, P., 2019. Enhancement of Fracture Forming Limits by Crystallographic Texture Reformation of AA1050 Sheets in Single Point Incremental Forming. In: IOP Conf. Series: Materials Science and Engineering IDDRG 2019: International Deep Drawing Research Group 38th Annual Conference, Enschede, The Netherlands, 3-7 June 2019, 651(1), 012074, pp.1-7. doi:10.1088/1757-899X/651/1/012074
- Dabholkar, A.P., Pande, S. and Tandon, P., 2019, Design Toolkit for Sustainable Ideation. In: The LeNS World Distributed Conference – Design for Sustainability for All. Bangalore, 3-5 April 2019. [Presented by Ameya Dabholkar and Shivangi Pande]
- Deokar, S.U., Jain, P.K., Tandon, P. and Pathak, A., 2019. Analysis of Springback and Force behavior in Single Point Incremental Sheet Forming though FEA. In: International Conference of Materials Processing and Characterization (ICMPC-2019), GRIET, Hyderabad, India, 8-9 March 2019. [Presented by Swapnil U. Deokar]
- Modi, S.R., Kankar, P.K. and Tandon, P., 2019. Finite Element Analysis of Langevin Bolted Ultrasonic Transducer for Incremental Sheet Forming Process. In: NFEST 2019: 2nd International Conference on New Frontiers in Engineering, Science & Technology, N.I.T., Kurukshetra, India, 18-22 February 2019. [Presented by Sitaram Modi]
- Deokar, S.U., Jain, P.K., and Tandon, P., 2018. Formability Assessment in Single Point Incremental Sheet Forming through Finite Element Analysis. Material Today: Proceedings, 5(11/3), pp. 25430-25439. doi:10.1016/j.matpr.2018.10.348
- Khan, A. and Tandon, P., 2018. Realizing the end-of-life considerations in the design of food packaging. Journal of Packaging Technology and Research, 2(3), pp.251-263. doi:10.1007/s41783-018-0041-6
- Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. Investigation on the effects of process parameters in CNC assisted pellet based fused layer modeling process, Journal of Manufacturing Processes, 35, pp.428-436. doi:10.1016/j.jmapro.2018.08.029
- Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. The effect of process parameters on tensile behavior of 3D printed flexible parts of ethylene vinyl acetate (EVA). Journal of Manufacturing Processes, 35, pp.317-326. doi:10.1016/j.jmapro.2018.08.013
- Singh, S.K. and Tandon, P., 2018. Heterogeneous modeling based prosthesis design with porosity and material variation. Journal of the Mechanical Behavior of Biomedical Materials, 87, pp.124-131. doi:10.1016/j.jmbbm.2018.07.029
- Khan, A. and Tandon, P., 2018. Design from Discard: : A Method to Reduce Uncertainty in Upcycling Practice. Design and Technology Education: An International Journal, 23(2), pp.129-153. doi:https://ojs.lboro.ac.uk/DATE/article/view/ 2236/2712
- Shrivastava, P. and Tandon, P., 2018. Enhancement of Process Capabilities and Numerical Prediction of Geometric Profiles and Global Springback in Incrementally Formed AA 1050 Sheets. Transactions of the Indian Institute of Metals, 71(9), pp.2145-2155. doi:10.1007/s12666-018-1346-4
- Shrivastava, P., Kumar, P., Tandon, P. and Pesin, A., 2018. Improvement in formability and geometrical accuracy of incrementally formed AA1050 sheets by microstructure and texture reformation through preheating, and their FEA and experimental validation. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(7), pp.335. doi:10.1007/s40430-018-1255-9
- Singh, R. and Tandon, P., 2018. Framework for improving universal design practice. International Journal of Product Development, 22(5), pp.377-407. doi:10.1504/IJPD.2018.093433
- Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. Additive manufacturing of flexible electrically conductive polymer composites via CNC-assisted fused layer modeling process. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(4), pp.175. doi: 10.1007/s40430-018-1116-6
- Soni, S., Tandon, P. and Khanna, P., 2018. Knowledge system for early phase aesthetic concept generation in industrial design. International Journal of Intelligent Systems Design and Computing, 2(1), pp.45-75. doi:10.1007/s10115-018-1159-0
- Kumar, P. and Tandon, P., 2018. Bionic knowledge and information reuse methodology for uncertainty minimization in product design. Knowledge and Information Systems, 57(2), pp.287-309. doi:10.1007/s10115-018-1159-0
- Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. Extrusion-based additive manufacturing process for producing flexible parts. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(3), pp.143. doi:10.1007/s40430-018-1068-x
- Kumar, N., Jain, P.K., Tandon, P., and Pandey, P.M., 2018. 3D Printing of Flexible Parts using EVA material, Material Physics and Mechanics, 37(2), pp.124-132. doi:10.18720/MPM.3722018_3
- Tandon, P. and Sharma, O.N., 2018. Experimental investigation into a new hybrid-forming process: Incremental stretch drawing. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 232(3), pp.475-486. doi:10.1177/0954405416645983
- Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M., 2018. Experimental investigations on suitability of polypropylene (PP) and ethylene vinyl acetate (EVA) in additive manufacturing. Materials Today: Proceedings, 5(2), pp.4118-4127. doi:10.1016/j.matpr.2017.11.672
- Vispute, M., Kumar, N., Jain, P.K., Tandon, P. and Pandey, P.M. 2018. Shrinkage compensation study for performing machining on Additive Manufactured parts, Material Today Proceedings, 5(9:3), pp.18532-18539. doi:10.1016/j.matpr.2018.06.197
- Singh, S.A. and Tandon, P., 2018. Comparative Analysis of Incremental Sheet Forming at Ambient and Elevated Temperatures using Finite Element Modeling. In: 19th ISME Conference – Advances in Mechanical Engineering, Dr. B. R. Ambedkar National Institute of Technology, Jalandhar, India, 20-22 December 2018, pp.15. [Presented by Swarit Anand Singh]
- Dayam, S., Priyadarshi, S. and Tandon, P., 2018. Simulation of Extrusion of Thermoplastic Binder in Additive Manufacturing Process. In 7th International & 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018), Anna University, Chennai, INDIA, 13-15 December 2018. [Presented by Sunidhi Dayam]
- Tiwari, V., Jain, P.K. and Tandon, P., 2018. Bio-Inspired Knowledge Representation Framework for Decision Making in Product Design. In: 7th International & 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2018), Anna University, Chennai, INDIA, 13-15 December 2018. [Presented by Sunidhi Dayam]
- Gupta, A., Raju, P.P., Priyadarshi, S., and Tandon, P., 2018. Deformation Machining. In: Conference on Sheet Metal Forming (SMF 2018), Chennai, India, 6-7 December 2018, pp.37 [Presented by P. Kumar and P.P. Raju]
- Hasan, A., Sahu, A., Manish, N. Singh, S.A., Modi, S., Nagargoje, A., Raju, P.P., Kumar, P., Priyadarshi, S., Kankar, P., Jain, P.K., and Tandon, P., 2018. Adaptive Double Sided Incremental Forming. In: Conference on Sheet Metal Forming (SMF 2018), Chennai, India, 6-7 December 2018, pp.38 [Presented by P. Kumar and P.P. Raju]
- Singh, S.A., Priyadarshi, S., and Tandon, P., 2018. Review of Incremental Sheet Forming Process at Elevated Temperature. In: Conference on Sheet Metal Forming (SMF 2018), Chennai, India, 6-7 December 2018, pp.39 [Presented by P. Kumar and P.P. Raju]
- Shrivastava, P. and Tandon, P., 2018. Efficiency Enhancement of Single Point Incremental Forming Simulation by Mitigating Hourglass Phenomenon. In: The 8th International Conference on Research in Engineering, Science and Technology, Paris, France, 2-4 November 2018, pp.81-89. [Presented by Parnika Shrivastava]
- Pesin A., Chukin M., Tandon P., Pustovoitov D., Drigun E., Pesin I. and Kozhemyakina A. 2018. Development of Theory and Technologies for Hybrid Metal Forming of Steel Complex Parts. In: 27th International Conference on Metallurgy and Materials - METAL 2018, Brno, Czech Republic, 23-25 May 2018. [Presented by Alexander Pesin]
- Priyadarshi, S., Verma, S., and Tandon, P., 2018. Development of Double Sided Incremental Forming Strategies for Improvement in Part Accuracy. Twelfth International Tools and Methods of Competitive Engineering (TMCE) Symposium, Las Palmas de Gran Canaria, Spain, 7 -11 May 2018. [Presented by Puneet Tandon]
- Vispute, M., Kumar, N., Jain, P.K., Tandon, P., and Pandey, P.M., 2018. Shrinkage Compensation Study for Performing Machining on Additive Manufactured Parts. 8th International Conference of Materials Processing and Characterization (ICMPC), Hyderabad, India, 16-18 March 2018, pp. 79. [Presented by Mayur Vispute]
- Shrivastava, P., and Tandon, P., 2018. Deformation induced Surface Roughness and Global Spring Back resulted with different plastic strain levels in Incremental Forming of original and preheated sheet samples. 1st International and 4th National Conference on Reliability and Safety Engineering (INCRS), IIITDM Jabalpur, India, 26-28 February 2018. [Presented by Parnika Shrivastava]
- Vispute, M., Kumar, N., Jain, P. K., Tandon, P., Pandey, P. M., 2018. On the Surface Finish Improvement Through Hybrid Additive Subtractive Manufacturing Process. 3rd International Conference on Innovative Design, Analysis & Development Practices in Aerospace and Automotive Engineering (IDAD), Vel Tech Rangarajan Dr Sagunthala R&D Institute of Science and Technology, Avadi, Chennai, India, 22-24 February 2018. [Presented by Mayur Vispute]
- Kumar, N., Jain, P.K., Tandon, Puneet and Pandey, P.M., "Extrusion based Additive Manufacturing Process for Producing Flexible Parts", Journal of the Brazilian Society of Mechanical Sciences and Engineering (BMSE), 2017
- Deokar, S.U., Jain, P.K., and Tandon, Puneet, “Formability Assessment in Single Point Incremental Sheet Forming through Finite Element Analysis”, Materials Today: Proceedings, 2017, Vol. , pp. [Accepted for Publication]
- Kumar, Prabhat and Tandon, Puneet, “Classification and mitigation of uncertainty as per the product design stages: Framework and Case Study”, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2017, pp. 1-22. DOI: 10.1007/s40430-017-0822-9
- Kumar, Pavan, and Tandon, Puneet, “Estimation of Material Model Parameters from Mixed Loading Test for effective Simulation of Incremental Sheet Forming”, International Conference on Modeling, Simulation and Control (ICMSC'17), World Congress on Engineering and Computer Science 2017 (WCECS 2017), San Francisco, USA, October 25-27, 2017, pp. 841-846 [Presented by Puneet Tandon]
- Singh, Sudhir Kumar, and Tandon, Puneet, “Comparison of Heterogeneous Modeling Based Different Patterns of Hip Prosthesis Design”, International Conference on Computational Biology 2017 (ICCB'17), World Congress on Engineering and Computer Science 2017 (WCECS 2017), San Francisco, USA, October 25-27, 2017, pp. 530-533 [Presented by Puneet Tandon]
- Kumar, Narendra, Jain, P.K., Tandon, Puneet, and Pandey, P.M., “3D Printing of Flexible Parts”, International Conference on Physics and Mechanics of New Materials and Their Applications (PHENMA 2017), October 14-16, 2017, IIITDM Jabalpur, India. [Presented by Narendra Kumar]
- Deokar, S.U., Jain, P.K., and Tandon, Puneet, “Formability Assessment in Single Point Incremental Sheet Forming through Finite Element Analysis”, International Conference on Advances in Materials and Manufacture Applications (IConAMMA 2017), Bengaluru, India, August 17-19, 2017, Ref. No. IConAMMA_2017_66, pp. [Presented by Swapnil U. Deokar]
- Amar, Animesh Kumar, and Tandon, Puneet, “Study of effect of addition of a polymer on abrasive water jet machining by simulation”, International Conference on Manufacturing Technology and Simulation (ICMTS 2017), IIT Madras, Chennai, India, July 7-8, 2017, pp. [Presented by Animesh K. Amar]
- Panjwani, Deepesh, Priyadarshi, S., Jain, P.K., Samal, M.K., Roy, D., Roy, J.J., Tandon, Puneet, "A novel approach based on flexible supports for forming non-axisymmetric parts in SPIF", International Journal of Advanced Manufacturing Technology, 2017, Volume 92, Issue 5–8, pp 2463–2477. DOI: 10.1007/s00170-017-0223-3, DOI 10.1007/s00170-017-0223-3
- Gupta, Vikas and Tandon, Puneet, “Heterogeneous Composition Adaptation with Material Convolution Control Features”, ASME Journal of Computer and Information Science in Engineering, 2017, Vol. 17, Issue 2, pp. 021008-1 - 10. DOI: 10.1115/1.4034741
- Patel, Divyansh and Tandon, Puneet, “Experimental investigations of Gelatin enabled abrasive water slurry jet machining”, International Journal of Advanced Manufacturing Technology, 2017, Vol. 89, No. 1-4, pp. 1193-1208, DOI: 10.1007/s00170-016-9154-7
- Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “A Bijective soft set theoretic approach for concept selection in design process”, Journal of Engineering Design, 2017, Vol. 28, Issue 2, pp. 100-117. DOI: 10.1080/09544828.2016.1274718
- Pachaury, Yash & Tandon, Puneet, “An Overview of Electric discharge machining of ceramics and Ceramic based composites”, Journal of Manufacturing Processes, 2017, Vol. 25, pp. 369-390. DOI: 10.1016/j.jmapro.2016.12.010
- Nirala, H.K., Jain, P.K., Roy, J.J., Samal, M.K., Tandon, Puneet, “An approach to eliminate stepped features in Multistage Incremental Sheet Forming Process: Experimental and FEA Analysis”, Journal of Mechanical Science and Technology, 2017, Vol. 31, Issue 2, pp. 599-604. DOI: 10.1007/s12206-017-0112-6
- Kumar, Narendra, Jain, P.K., Tandon, Puneet and Pandey, P.M., “Experimental investigations on suitability of polypropylene (PP) and ethylene vinyl acetate (EVA) in Additive Manufacturing”, 7th International Conference of Materials Processing and Characterization (ICMPC 2017), March 17-19, 2017, Hyderabad, India. [Presented by Narendra Kumar]
- Khan, Amaltas, and Tandon, Puneet, "Closing the Loop: ‘Systems Perspective’ for the Design of Food Packaging to facilitate Material Recovery", 6th International Conference on Research into Design (ICoRD’ 17), January 9-11, 2017, Indian Institute of Technology Guwahati, India, Published in Smart Innovation, Systems and Technologies, Vol. 66 [Research into Design for Communities, Vol. 2, A. Chakrabarti and D. Chakrabarti (eds.), Proceedings of ICoRD 2017], pp. 349-360. DOI 10.1007/978-981-10-3521-
- Kumar, Prabhat, and Tandon, Puneet, "Improvised concept development process in design through product ingredients", 6th International Conference on Research into Design (ICoRD’ 17), January 9-11, 2017, Indian Institute of Technology Guwahati, India, Published in Smart Innovation, Systems and Technologies, Vol. 66 [Research into Design for Communities, Vol. 2, A. Chakrabarti and D. Chakrabarti (eds.), Proceedings of ICoRD 2017], pp. 453-464. DOI 10.1007/978-981-10-3521-0_39
- Kumar, Prabhat and Tandon, Puneet, “A paradigm for customer-driven product design approach using extended axiomatic design”, Journal of Intelligent Manufacturing, 2016, pp. 1-15. DOI: 10.1007/s10845-016-1266-2
- Nirala, H.K., Jain, P.K., Roy, J.J., Samal, M.K., Tandon, Puneet, “An approach to eliminate stepped features in Multistage Incremental Sheet Forming Process: Experimental and FEA Analysis”, Journal of Mechanical Science and Technology [Accepted for Publication]
- Singh, Ravindra and Tandon, Puneet, “User Values based Evaluation Model to Assess Product Universality”, International Journal of Industrial Ergonomics, 2016, Vol. 55, pp. 46–59. DOI: 10.1016/j.ergon.2016.07.006
- Sharma, Om Namah and Tandon, Puneet, “Experimental investigation into a new hybrid forming process: Incremental Stretch Drawing”, Proc. IMechE Part B: Journal of Engineering Manufacture, 2016, Vol. 232, Issue 3, pp. 475-486, DOI: 10.1177/0954405416645983
- Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Product Design Concept Evaluation using Rough Sets and VIKOR Method”, Advanced Engineering Informatics, 2016, Vol. 30, pp. 16–25. DOI: 10.1016/j.aei.2015.11.005
- Shaikh, S., Kumar, N., Jain, P.K., and Tandon, Puneet, Hilbert Curve Based Toolpath for FDM Process, Lecture Notes in Mechanical Engineering, Mandal, Dipak Kumar, Syan, Chanan Singh (Eds.), Proceedings of 28th International Conference on CARs & FoF 2016, Springer. Print ISBN: 978-81-322-2738-0, Electronic ISBN 978-81-322-2740-3
- Panjwani, Deepesh, Jain, P.K., Samal, M.K., Roy, J.J,Roy, D. and Tandon, Puneet Tandon, Single Point Incremental Forming Using Flexible Die, Lecture Notes in Mechanical Engineering, Mandal, Dipak Kumar, Syan, Chanan Singh (Eds.), Proceedings of 28th International Conference on CARs & FoF 2016, Springer. Print ISBN: 978-81-322-2738-0, Electronic ISBN 978-81-322-2740-3
- Dwivedi, Divyansh, Kumar, A., Priyadarshi, S., Jain, P.K., Tandon, Puneet, “Numerical Prediction of Fracture in Parts formed with Incremental Sheet Forming Process”, 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), December 16-18, 2016, College of Engineering, Pune, INDIA [Presented by Divyansh Dwivedi]
- Chetani, Aman, Priyadarshi, Satwik, Kumar, Pavan, Jain, P.K. and Tandon, Puneet, “State of the Art in Double Sided Incremental Forming”, Conference on Sheet Metal Forming, 2016 (SMF 2016), December 08-09, 2016, Indian Institute of Technology Bombay, India [Presented by Satwik Priyadarshi]
- Kumar, Pavan, Priyadarshi, Satwik, Chetani, Aman and Tandon, Puneet, “Finite Element Modelling of Double Sided Incremental Forming“, Conference on Sheet Metal Forming, 2016 (SMF 2016), December 08-09, 2016, Indian Institute of Technology Bombay, India [Presented by Satwik Priyadarshi]
- Priyadarshi, Satwik, Kumar, Pavan, Chetani, Aman, Jain, P.K. and Tandon, Puneet, “Generation of Automatic Multi-Pass tool path for Incremental Sheet Forming”, Conference on Sheet Metal Forming, 2016 (SMF 2016), December 08-09, 2016, Indian Institute of Technology Bombay, India [Presented by Satwik Priyadarshi]
- Kumar, Abhishek, Dwivedi, Divyansh, Priyadarshi, Satwik, Tandon, Puneet, “Numerical Modelling of Incremental Sheet Forming Process with Copper Sheets”, Conference on Sheet Metal Forming, 2016 (SMF 2016), December 08-09, 2016, Indian Institute of Technology Bombay, India [Presented by Abhishek Kumar]
- Singh, Ravindra, and Tandon, Puneet, 'A Sustainable Approach to Develop Universal Products', 6th International Kansei Engineering and Emotion Research Conference (KEER 2016), August 31- September 2, 2016, University of Leeds, UK, Paper # 99 [Presented]
- Ganesh, S., and Tandon, Puneet, 'Process-centric design solutions for unorganized sectors in developing country', 6th International Kansei Engineering and Emotion Research Conference (KEER 2016), August 31- September 2, 2016, University of Leeds, UK, Paper # 185 [Presented]
- Ordonez, Isabel, Khan, A., Tandon, Puneet, Rexfelt, Oskar, “Designing with Waste: comparison of two Practice-based Education cases”, 18th International Conference on Engineering & Product Design Education (EPDE 2016), September 8-9, 2016, Aalborg University, Denmark, Paper No. 1282 [Presented by Prof. Ordonez]
- Kumar, N., Jain, P.K., Tandon, Puneet and Pandey P.M., Toolpath Generation for Additive Manufacturing using CNC Milling Machine, 6th International Conference on Additive Manufacturing Technologies - AM 2016, AMSI, Bangalore, October 6-7, 2016, Bangalore, INDIA [Presented by Narendra Kumar]
- Panjwani, Deepesh, Jain, P.K., Samal, M.K., Roy, J.J,Roy, D. and Tandon, Puneet, Single Point Incremental Forming Using Flexible Die, 28th International Conference on CAD/CAM, Robotics and Factories of the Future 2016 (28 CARS & FoF 2016), January 6-8, 2016, College of Engineering and Management, Kolaghat, WB, India, [Presented by Dr. Debanik Roy]
- Shaikh, Saquib, Kumar, Narendra, Jain, P.K., and Tandon, Puneet, Hilbert Curve Based Toolpath for FDM Process, 28th International Conference on CAD/CAM, Robotics and Factories of the Future 2016 (28 CARS & FoF 2016), January 6-8, 2016, College of Engineering and Management, Kolaghat, WB, India, pp. 751-759 [Presented by Mr. Narendra Kumar]
- Kumar, Narendra, Shaikh, Saquib, Jain, P.K. and Tandon, Puneet, “Effect of fractal curve based toolpath on part strength in fused deposition modelling”, Int. J. Rapid Manufacturing, 2015, Vol. 5, No. 2, pp. 186-198. DOI: 10.1504/IJRAPIDM.2015.073576
- Gupta, T.V.K., Ramkumar J., Tandon, Puneet, and Vyas, N.S., “Application of Artificial Neural Networks in Abrasive Water Jet Milling”, Procedia CIRP, 2015, Vol. 37, pp. 225-229. DOI: 10.1016/j.procir.2015.08.076
- Kumar, Vimlesh, Sambhav, Kumar, and Tandon, Puneet, “Force Modeling in Ball-end Milling and its Application to Sculptured Surface Machining”, Journal of Material Science and Mechanical Engineering (JMSME) Print ISSN: 2339-9095; Online ISSN: 2393-9109; 2015, Volume 2, Number 6; pp. 4 – 8
- Pachaury, Yash and Tandon, Puneet, A Holistic Modelling for Numerical Simulation of Electric Discharge Machining Process, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2015, November 13-19, 2015, Houston, Texas, Paper No. IMECE2015-50860 [Presented by Puneet Tandon]
- Shrivastava, Parnika, Roy, J.J., Samal, M.K., Jain, P.K. and Tandon, Puneet, Parameter Optimization of AA1050A in Incremental Sheet metal forming process based on Taguchi design and response surface methodology, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2015, November 13-19, 2015, Houston, Texas, Paper No. IMECE2015-51227 [Presented by Puneet Tandon]
- Sahu, Govind N., Saxena, Sumit, Roy, J.J., Samal, M.K., Jain, P.K. and Tandon, Puneet, Shell element formulation based Finite Element modeling, analysis and experimental validation of incremental sheet forming process, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2015, November 13-19, 2015, Houston, Texas, Paper No. IMECE2015-53146 [Presented by Puneet Tandon]
- Kumar, Pavan, Priyadarshi S., Roy, J.J., Samal, M.K., Jain, P.K. and Tandon, Puneet, Effect of Tool shape on Surface Finish of components formed through Incremental Sheet Forming process, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2015, November 13-19, 2015, Houston, Texas, Paper No. IMECE2015-53282 [Presented by Puneet Tandon]
- Patel, Divyansh and Tandon, Puneet, “Experimental investigations of thermally enhanced abrasive water jet machining of hard-to-machine materials”, CIRP Journal of Machining Science and Technology, August 2015, Vol. 10, pp. 92-101. DOI: 10.1016/j.cirpj.2015.04.002
- Gupta, Vikas and Tandon, Puneet, “Heterogeneous object modeling with geometric references”, Computer Aided Design, 2015, Vol. 62, pp. 236-247. DOI: 10.1016/j.cad.2014.12. 005
- Priyadarshi, Satwik, Jain, P.K., Roy, J.J., Samal, M.K., Roy, D. and Tandon, Puneet, “Feature based assessment of forming force behavior in Incremental Sheet Forming”, WSCG’2015, 23rd International Conference on Computer Graphics, Visualization and Computer Vision 2015, Plzen, Czech Republic, June 8 - 12, 2015, Vol.: 23, Issue: P, pp.: 95-104 [Presented by Satwik Priyadarshi]
- Shrivastava, Parnika and Tandon, Puneet, “Investigation of the effect of grain size on forming forces in Single Point Incremental Sheet Forming”, Procedia Manufacturing, 2015, Vol. 2, pp. 41-45, DOI: 10.1016/j.promfg.2015.07.008
- Goel, V.K., Khanduja, D., Garg, T.K. & Tandon Puneet, “Computational Support in Design and Fabrication of Traditional Indian Jewellery”, Computer Aided Design & Applications, 2015, Vol. 12, No. 4, pp. DOI: 10.1080/16864360.2014.997642
- Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Design decision automation support through knowledge template CAD model”, Computer Aided Design & Applications, 2015, Vol. 12, No. 1, pp. 96-103. DOI: 10.1080/16864360.2014.949580
- Kumar, Vimlesh, Sambhav, Kumar, and Tandon, Puneet, “Force Modeling in Ball-end Milling and its Application to Sculptured Surface Machining”, International Conference on Innovative Research in Mechanical, Electrical, Electronics, Civil, Computer Science and Information Technology (MECIT-2015), JNU, New Delhi, India, May 16-17, 2015, Vol. 2, No. 6, pp. [Presented by Vimlesh Kumar]
- Khan, Amaltas and Tandon, Puneet, “Design for multiple life cycles: A teaching-learning pedagogy for designing products for multiple life cycles”, The Third International Conference on Creativity and Innovations at Grassroots, IIM Ahmedabad, January 19-22, 2015, [Presented by Amaltas Khan]
- Kumar, Prabhat and Tandon, Puneet, “Uncertainty and Decision Making in Product Design: A Fuzzy Approach”, The Third International Conference on Design Creativity (3rd ICDC), IISc Bangalore, January 12-14, 2015, pp. 174-181 [ISBN 978-1-904670-60-5] [Presented by Prabhat Kumar]
- Shrivastava, Parnika and Tandon, Puneet, “Investigation of the effect of grain size on forming forces in Single Point Incremental Sheet Forming”, 2nd International Materials, Industrial, and Manufacturing Engineering Conference (MIMEC2015), Bali, Indonesia, February 4-6, 2015, Vol. 2, pp. 41-45. [Presented by Parnika Shrivastava]
- Sambhav, K., Tandon, Puneet & Dhande, S.G., “Force modeling for generic profile of drills”, ASME Journal of Manufacturing Science and Engineering, 2014, Vol. 136, No. 4, pp. 041019-1-9. DOI: 10.1115/1.4027595
- Jain, Richa, Vasantha Kumar, M., and Tandon, Puneet, “Optimization methodology for beam gauges of the bus body for weight reduction”, Applied and Computational Mechanics, 2014, Vol. 8, No. 1, pp. 47-62
- Gupta, T.V.K., Ramkumar J., Tandon, Puneet and Vyas N.S., "Application of Grey Relational Analysis for Geometrical Characteristics in Abrasive Water Jet Milled Channels", 5th International and 26th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2014, IIT Guwahati, December 12-14, 2014. Pp. 393-1 – 393-6
- Jain, Vandana and Tandon, Puneet, “Effect of Slurry Temperature on Kerf Taper angle in Abrasive Water Jet Machining”, 2nd International Conference on Innovations in Engineering and Technology (ICCET’2014) (Organized by International Institute of Engineers), Penang (Malaysia), September 19-20, 2014, pp. 77-82. DOI: 10.15242/IIE.E0914033
- Gupta, T.V.K., Ramkumar J., Tandon, Puneet and N S Vyas, "State of the art on Abrasive Water Jet milling: Challenges ahead", International Colloquium on Materials, Manufacturing and Metrology, ICMMM 2014, IIT Madras, Chennai, India, August 8-9, 2014. Ref No. ICM2586, pp. 303-304
- Gupta, Vikas, Bajpai, V.K. & Tandon, Puneet, “Slice Generation and Data Retrieval Algorithm for Rapid Manufacturing of Heterogeneous Objects”, Computer Aided Design & Applications, 2014. Vol. 11, No. 3, pp. 255-262. DOI: 10.1080/16864360.2014.863483
- Soni, S., Khanna, P. and Tandon, Puneet, ‘Computational support to aesthetics in industrial design”, CAD’14 Conference, 2014 International CAD Conference, Hong Kong, China, June 23-26, 2014 [CAD14-107] [Presented by Varun Tiwari]
- Goel, Vineet Kumar, Khanduja, Dinesh, Garg, T.K. & Tandon Puneet, “Computational Support to design and fabrication of traditional Indian jewellery”, CAD’14 Conference, 2014 International CAD Conference, Hong Kong, China, June 23-26, 2014 [CAD14-057] [Presented by VK Goel]
- Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Design decision automation support through knowledge template CAD model”, CAD’14 Conference, 2014 International CAD Conference, Hong Kong, China, June 23-26, 2014 [CAD14-012] [Presented by Varun Tiwari]
- Jain, V.K., Tandon, Puneet, Editorial (2013) International Journal of Manufacturing Technology and Management, 27 (1-3), pp. 1-3.
- Gupta, T.V.K., Ramkumar J., Tandon, Puneet and Vyas, N.S., “Role of Process Parameters on Pocket Milling with Abrasive Water Jet Machining Technique”, International Journal of Mechanical Science and Engineering, 2013, Vol. 7, No. 10, pp. 627-632
- Gupta, T.V.K., Ramkumar J., Tandon, Puneet and Vyas, N.S., “A study on the deviations of the jet with traverse speeds on different materials during pocket milling using Abrasive Water Jet”, Applied Mechanics and Materials, 2013, Vol. 372, pp. 402-405. DOI: 10.4028/www.scientific.net/AMM.372.402
- Soni, S., Khanna, P. and Tandon, Puneet, “Knowledge Support System for Aesthetics in Product Design”, ASME Journal of Computer and Information Science in Engineering, 2013, Vol. 13, No. 1, pp. 011006-1-11. DOI:10.1115/1.402335
- Sambhav, K., Tandon, Puneet, Kapoor, S.G. & Dhande, S.G., “Mathematical Modeling of Cutting Forces in Micro-Drilling”, ASME Journal of Manufacturing Science and Engineering, February 2013, Vol. 135, Issue 1, pp. 014501-1-8, DOI: 10.1115/1.4007955
- Khan, Mohammed Rajik and Tandon, Puneet, Mathematical modeling of a generic multi-profile form milling cutter, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, May 2013, Vol. 227, No. 5, pp. 1036–1046. DOI: 10.1177/0954406212455890
- Khan, Md Rajik & Tandon, Puneet, Parameterized Geometric Design of a Generic Form Milling Cutter, Computer Aided Design & Applications, 2013, Vol. 10, No. 5, pp. 757-765. DOI: 10.3722/cadaps.2013.757-765
- Pal, Vijay Kumar and Tandon, Puneet, Identification of role of machinability and milling depth on machining time in controlled depth milling using abrasive water jet, International Journal of Advanced Manufacturing Technology, 2013, Vol. 66, No.5-7, pp. 877–881. DOI: 10.1007/s00170-012-4373-z
- Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Design Process Automation Support through Knowledge Base Engineering”, Lecture Notes in Engineering and Computer Science (LNECS), S. I. Ao and Len Gelman and David WL Hukins and Andrew Hunter and A. M. Korsunsky (Eds.), Proceedings of The World Congress on Engineering 2013, Volume 2, pp. 737-742. ISBN: 978-988-19252-8-2
- Khan, M.R. and Tandon, Puneet, “Development of the geometry and its redesigning for a special shaped milling cutter”, Lecture Notes in Engineering and Computer Science (LNECS), S. I. Ao and Len Gelman and David WL Hukins and Andrew Hunter and A. M. Korsunsky (Eds.), Proceedings of The World Congress on Engineering 2013, Volume 1, pp. 526-531. ISBN: 978-988-19251-0-7
- Gupta, T.V.K., Ramkumar J., Tandon, Puneet and Vyas, N.S., “Influence of process parameters on the dimensions of the channels prepared using abrasive water jet machining”, 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE2013-64063
- Patel, Divyansh and Tandon, Puneet, “Optimization of Kerf Surface and Material Removal Rate using Abrasive Water-Slurry Jet machining setup”, 2013 ASME International Mechanical Engineering Congress and Exposition (IMECHE), November 15-21, 2013, San Diego, CA, USA, Ref No. IMECE2013-64245
- Gupta, T.V.K., Tandon, Puneet, Ramkumar J. and Vyas, N.S, “Role of process parameters on pocket milling with Abrasive Water Jet Machining technique”, International Conference on Aerospace, Mechanical, Automotive and Materials Engineering, ICAMAME 2013, October 22-23, 2013, Dubai, UAE. Published in Word Academy of Science, Engineering and Technology, Issue 82, October 2013, pp.1374-1379.
- Gupta, T.V.K., Ramkumar J., Tandon, Puneet, and Vyas, N.S, “State of the art review of Abrasive water jets for milling applications: Top 10 challenges ahead” Manufacturing: Vision for Future Conference, IIT Guwahati, October 12-13, 2013 [Presented by TVK Gupta]
- Soni, S., Khanna, P. and Tandon, Puneet, “Generative Evolutionary Action Grammar Based Form Exploration”, 2013 ASME 33rd Computers and Information in Engineering (CIE) Conference and International Design Engineering Technical Conference (IDETC), Portland, OR, USA, August 4-7, 2013. Ref No. IDETC/CIE #13024
- Tiwari, Varun, Jain, P.K. and Tandon, Puneet, “Design Process Automation Support through Knowledge Base Engineering”, The 2013 International Conference of Computational Intelligence and Intelligent Systems, World Congress on Engineering 2013, London, U.K., July 3-5, 2013, Ref. No. ICCIIS_33, pp. 737-742. [Presented by Puneet Tandon]
- Khan, M.R. and Tandon, Puneet, “Development of the Geometry and its Redesigning for a Special Shaped Milling Cutter”, The 2013 International Conference of Manufacturing Engineering and Engineering Management, World Congress on Engineering 2013, London, U.K., July 3-5, 2013, Ref. No. ICMEEM_151, pp. 526-531. [Presented by M. Rajik Khan]
- Sambhav, Kumar, Tandon, Puneet and Dhande, S.G., “Force Modeling for Generic Profile of Drills” ASME 2013 International Manufacturing Science and Engineering Conference (MSEC 2013) June 10-14, 2013, Madison, Wisconsin, USA. Ref. No. MSEC2013-1262
- Gupta, T.V.K., Ramkumar J., Tandon, Puneet and N S Vyas, “A study on the deviations of the jet with traverse speeds on different materials during pocket milling using Abrasive Water Jet”, 2013 the 2nd International Conference on Advance Materials Design and Mechanics (ICAMDM 2013), 17-18 May 2013, Kuala Lumpur, Malaysia. Paper ID:96
- Sambhav, Kumar, Tandon, Puneet and Dhande, S.G., “CAD Based Geometric and Force Modeling of Single Point Form-cutting Tools”, Computer Aided Design & Applications, 2013, Vol. 10, No. 1, pp. 45-57. DOI: 10.3722/cadaps.2013.45-57
- Soni, S., Khanna, P. and Tandon, Puneet, “Extended Axiomatic Design and Computational Support to Design for Aesthetics”, Computer Aided Design & Applications, 2013, Vol. 10, No. 1, pp. 1-15. DOI: 10.3722/cadaps.2013.1-15
- Patel, Divyansh, Singh, Abhilasha and Tandon, Puneet, “Additive manufacturing of Casting Die with ideal shapes of gating system through Rapid Tooling”, National Conference on Recent Trends in Manufacturing & Technology (RTMST 2013), National Institute of Technical Teachers’ Training & Research, Kolkata, India, April 18-19, 2013, pp. 36-45.
- Gupta, T.V.K., Ramkumar, J., Vyas, N.S., Tandon, Puneet, “Material removal rate prediction for blind pocket milling of SS304 using Abrasive Water Jet Machining Process”, International Conference on Engineering and Applied Science (HKICEAS 2012), December 14-16, 2012, Hong Kong, pp. 368-375. [Presented by TVK Gupta]
- Pachori, R., Sharma, O.N., Jain, P.K., Tandon, Puneet, “Effect of Tool Geometry on Dieless Manufacturing”, 4th International and 25th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2012, December 14-16, 2012, Jadavpur University, Kolkatta, India, pp. 22-27. [Presented by Rahul Pachori]
- Gupta, T.V.K., Ramkumar, J., Vyas, N.S., Tandon, Puneet, “A preliminary investigation on the forces generated with process parameters during Abrasive Water Jet Milling on SS304”, Proceeding of the International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by TVK Gupta]
- Pal, Vijay, Chaudhary S.K. & Tandon, Puneet, “Time Reduction by using Square Path and Ellipical Path in Controlled Depth Milling using Abrasive Water Jet Machining”, Proceeding of the International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by Vijay Pal]
- Tiwari, V., Jain, P.K. and Tandon, Puneet, “Development of Knowledge Base Engineering Tools through Knowledge Fusion” Proceeding of the International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by Varun Tiwari]
- Soni, S., Khanna, P. and Tandon, Puneet, “Interactive Evolutionary System for Product Design”, Proceeding of the International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by S. Soni]
- Gulati, V., Singh, K. and Tandon, Puneet, “Computer generated Indian traditional decorative patterns for Woodcraft” Proceeding of the International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by Kulwant Singh]
- Kumar, P. and Tandon, Puneet, “An Integrated Approach to minimize Product Design Iterations” Proceeding of the International Conference on Innovations in Design & Manufacturing (InnDeM 2012), December 5-7, 2012, PDPM Indian Institute of Information Technology, Design and Manufacturing Jabalpur, India. [Presented by Prabhat Kumar]
- Warisawa, S., Tsuchiya, K., Gupta, V.K., Sheorey, T. and Tandon, Puneet, “Design and analysis of a micro pump for wearable blood sampling system”, 2012 ASME-ISPS / JSME-IIP Joint International Conference on Micromechatronics for Information and Precision Equipment (MIPE 2012), June 18-20, 2012, Santa Clara, California, USA. [Presented by Shin’chi Warisawa]
- Sambhav, K., Tandon, Puneet & Dhande, S.G., “Geometric modeling and validation of twist drills with a generic point profile”, Applied Mathematical Modelling, 2012, Vol. 36, pp. 2384-2403. DOI:10.1016/j.apm.2011.08.034
- Gupta, Vikas, Kasana, K.S. & Tandon, Puneet, “Reference Based Geometric Modeling for Heterogeneous Objects”, Computer Aided Design & Applications, 2012, Vol. 9, No. 2, pp. 155-165.
- Pal, Vijay & Tandon, Puneet, “A method to reduce milling time for Ti-6Al-4V Alloy Controlled Depth Milling using Abrasive Water Jet Machining”, Advanced Material Research, 2012, Vols. 383-390, pp. 1764-1768
- Pal, Vijay & Tandon, Puneet, “Effect of Abrasive Flow Rate in Milling with Abrasive Water Jet”, Applied Mechanics & Materials, 2012, Vols. 110-116, pp. 196-201.
- Vasal, Apurv, Mishra, Deepak and Tandon, Puneet, “A Novel and Cost Effective Approach to Public Vehicle Tracking System”, International Journal of UbiComp (IJU), 2012, Vol. 3, No. 1, pp. 33–44.
- Soni, S., Khanna, P. and Tandon, P., 2012. Extended Axiomatic Design and Computational Support to Design for Aesthetics. In: CAD'12, the 2012 International CAD Conference and Exhibition, Niagara Falls, Ontario, Canada, 11-14 June 2012. [Presented by Puneet Tandon]
- Sambhav, K., Tandon, P. and Dhande, S.G., 2012. CAD Based Geometric and Force Modeling of Single Point Form-cutting Tools. In: CAD'12, the 2012 International CAD Conference and Exhibition, Niagara Falls, Ontario, Canada, 11-14 June 2012. [Presented by Puneet Tandon]
- Khan, M.R. and Tandon, P., 2012. Parameterized Geometric Design of a Generic Form Milling Cutter. In: CAD'12, the 2012 International CAD Conference and Exhibition, Niagara Falls, Ontario, Canada, 11-14 June 2012. [Presented by Puneet Tandon]
- Soni, S., Khanna, P. and Tandon, Puneet, Capturing the Aesthetic Design Intention in Product Design, Ninth International Symposium on Tools and Methods of Competitive Engineering, TMCE 2012, May 7 -11, 2012, Karlsruhe, Germany (Ref. No. 116) [Accepted]
- Sambhav, Kumar, Tandon, Puneet, Kapoor, S.G. and Dhande, S.G., “Mathematical Modeling of Cutting Forces in Micro-Drilling”, Proceedings of the ASME 2012 International Manufacturing Science and Engineering Conference, MSEC 2012, June 4-8, 2012, Notre Dame, Indiana, USA, [MSEC2012-7399], pp. 979-986.
- Tandon, Puneet, “Additive Manufacturing”, National Seminar on Advancement in Material Processing and Production Technology, GGITS, Jabalpur, February 24-25, 2012, pp. 29-32. (Invited Paper) [Presented by Puneet Tandon]
- Sambhav, K., Tandon, Puneet & Dhande, S.G., “Mathematical Modeling of Generic Single Point Cutting Tool in Terms of Grinding Parameters”, Applied Mathematical Modelling, 2011, Vol. 35, pp. 5143–5164.
- Sambhav, K., Dhande, S.G. & Tandon, Puneet, “Computer Aided Design and Development of Customized Shoe Last” Computer Aided Design & Applications, 2011, Vol. 8, No. 6, pp 819-826.
- Tandon, Puneet et al., “Design and Simulation of an Intelligent Bicycle Transmission System”, IEEE/ASME Transactions on Mechatronics, Vol. 16, Issue 3, June 2011, Article number 5443749, pp. 509-517.
- Tandon, Puneet & Ito, Y., “Comparative Research into Marketability Reinforcement in Conventional Machining Center of China-, India-, Japan-, Korea- and Taiwan-Makes”, Journal of Machine Engineering, 2011, Vol. 11, No. 3, pp. 58-71
- Khan, Mohammed Rajik and Tandon, Puneet, Mathematical modeling for design of a generic custom-engineered form mill, International Journal of Advanced Manufacturing Technology, 2011, Vol. 54, Issue 1, pp. 139-148. DOI: 10.1007/s00170-010-2936-4
- Gupta, Arun Kumar, Chandna, Pankaj and Tandon, Puneet, “Hybrid Genetic Algorithm for minimizing non-productive machining time during 2.5 D Milling”, International Journal of Engineering, Science and Technology, 2011, Vol. 3, No. 1, pp. 183-190.
- Goel, V.K., Garg, T.K. and Tandon, P., 2011. Geometrical Modeling of 3D Patterns for Traditional Indian Kundan Jewelry. International Journal of Engineering Science and Technology, 3(7) pp.5666-5670.
- Gupta, Arun Kumar, Chandna, Pankaj and Tandon, Puneet, “Optimization of machining parameters and tool selection in 2.5D milling using Genetic Algorithm”, International Journal of Innovative Technology and Creative Engineering, 2011, Vol. 1, No. 8, pp. 21-27.
- Gupta, Arun Kumar, Chandna, Pankaj and Tandon, Puneet, “Tool life optimization in 2.5D milling by coupling regression model and Genetic Algorithm” International Journal of Engineering and Technology, 2011, Vol. 1, No. 1, pp. 2-8.
- Singhal, Sandeep, Tandon, Puneet and Sharma, S.K., “Critical Success Factors in Implementation of ERP in Education”, International Journal of Contemporary Practices, 2011, Vol. 1, No. 1, pp. 60-68. ISSN: 2231-5608.
- Singhal, Sandeep, Tandon, Puneet and Sharma, S.K., “Hardware and Software Requirements for implementation of ERP in Technical Education Institutes in India”, International Journal of Scientific & Engineering Research, 2011, Vol. 2, No. 4, pp. 1-5.
- Pal, Vijay & Tandon, Puneet, “A method to control the abrasive flow rate for Controlled Depth Milling of Ti-6Al-4V Alloy using Abrasive Water Jet Machining”, International Conference on Manufacturing Science & Technology (ICMST 2011), Singapore, September 16-18, 2011. [Presented]
- Sambhav, Kumar, Tandon, Puneet and Dhande, S.G., “Geometric Modeling and Analysis of Single Point Cutting Tools with Generic Profile”, ASME 2011 International Manufacturing Science and Engineering Conference (MSEC 2011) June 13-17, 2011, Corvallis, Oregon, USA, Vol. 1, pp. 285-293. (Paper No. MSEC2011-50275). DOI:10.1115/MSEC2011-50275 [Presented]
- Gupta, Vikas, Kasana, K.S. & Tandon, Puneet, “Reference Based Geometric Modeling for Heterogeneous Objects”, CAD'11, the 2011 International CAD Conference and Exhibition, Taipei, Taiwan, ROC, June 27-30, 2011. [Presented by Puneet Tandon]
- Goel, Vineet Kumar, Garg, T.K. & Tandon Puneet, “A New Paradigm to Develop Traditional Ornamental Designs”, CAD'11, the 2011 International CAD Conference and Exhibition, Taipei, Taiwan, ROC, June 27-30, 2011. [Presented by Puneet Tandon]
- Pal, Vijay & Tandon, Puneet, “Effect of Abrasive Flow Rate in Milling with Abrasive Water Jet”, 2nd International Conference on Mechanical, Industrial and Manufacturing Technologies (MIMT 2011), Sponsored by International Association of Computer Science and Information Technology (IACSIT), Singapore Institute of Electronics (SIE) and IEEE, Singapore, February 26-28, 2011, pp. V2-60-V2-63. [Presented by Vijay Pal] (*published in AMM Journal)
- Vasal, Apurv, Mishra, Deepak and Tandon, Puneet, “Deployment of GSM and RFID Technologies for Public Vehicle Position Tracking System”, The Second International Conference on Networks & Communications (NetCoM - 2010), Bangalore, India, January 2-4, 2011, pp. 191-201.
- Sambhav, K., Dhande, S.G. & Tandon, Puneet, “CAD Based Mechanistic Modeling of Forces for Generic Drill Point Geometry”, Computer Aided Design & Applications, 2010, Vol. 7, No. 6, pp. 809-819.
- Soni, S., Khanna, P. & Tandon, Puneet, “Multi-Agent Feature based Shape Grammar Implementation for Concept Generation of Industrial Product Design”, Computer Aided Design & Applications, 2010, Vol. 7, No. 6, pp. 797-807.
- Gulati, Vishal, Tandon, Puneet & Singh, Hari, “A Jewelry Modeler for Carved Bangles”, International Journal on Computer Applications, 2010, Vol. 5, No. 2, pp. 25-27.
- Gulati, Vishal & Tandon, Puneet, “A CAD Paradigm to Produce Zillij Style of Geometrical Patterns for Wooden Carvings”, International Journal on Computer Applications, 2010, Vol. 3, No. 3, pp. 36-39.
- Gulati, Vishal, Tandon, Puneet & Singh Hari, “A Jewelry Modeler for the Fret-worked Bangles”, International Journal on Computer Applications, 2010, Vol. 2, No. 2, pp. 76-80.
- Gulati, Vishal, Tandon, Puneet & Kamaldeep, “Parameterized Modeling of Blow-Moulds for Designer PET Bottles”, Computer Aided Design & Applications, 2010, Vol. 7, No. 4, pp. 479-487.
- Khan, Md Rajik & Tandon, Puneet, “Computer-Aided Design and Analysis of a Custom-Engineered Form Milling Cutter”, Computer Aided Design & Applications, 2010, Vol. 7, No. 2, pp. 213-219.
- Gupta, Vikas, Kasana, K.S. & Tandon, Puneet, “CAD Modeling, Algorithm Design, and System Structure for Rapid Prototyping of Heterogeneous Objects”, International Journal of Computer Applications in Engineering, Technology and Sciences (IJ-CA-ETS), (ISSN: 0974-3596), 2010, Vol. 2, Issue 2, pp. 299-303.
- Goel, Vineet, Garg, T.K. & Tandon, Puneet, "Geometric Modeling of Traditional Star Patterns for Computer Aided Ornamental Design", International Journal of Computer Applications in Engineering, Technology and Sciences (IJ-CA-ETS), (ISSN: 0974-3596), 2010, Vol. 2, Issue 2, pp. 214-219.
- Bansal, Rajesh, Kumar, P. & Tandon, Puneet, "Computer Aided Design of Thin Objects by Drafting", International Journal of Computer Applications in Engineering, Technology and Sciences (IJ-CA-ETS), (ISSN: 0974-3596), 2010, Vol. 2, Issue 2, pp. 208-213.
- Gulati, Vishal & Tandon, Puneet, “A CAD Paradigm to Produce Blow Moulds for Decorated PET Bottles”, International Journal on Computer Applications, 2010, Vol. 1, No. 5, pp. 99-102.
- Gupta, Vikas, Kasana, K.S. & Tandon, Puneet, "Computer-Aided Design Modeling for Heterogeneous Objects" Int Jl of Computer Science Issues, 2010, Volume 7, Issue 2, No. 5, March 2010, pp. 37-44.
- Goel, Vineet, Garg, T.K. & Tandon, Puneet, "A Frame Work of Smart CAD System for Primitive Jewelry Design" Int Jl of Computer Science Issues, 2010, Volume 7, Issue 2, No.5, pp. 31-36.
- Bansal, Rajesh, Kumar, P. & Tandon, Puneet, "Imprinting 3D Geometric Models" Int Jl of Computer Science Issues, 2010, Volume 7, Issue 2, No.2, pp. 39-48.
- Khan, Md Rajik & Tandon, Puneet, “Design of a Novel Multi-Radius Form Milling Cutter”, 3rd International and 24th All India Manufacturing Technology, Design and Research Conference – AIMTDR, Andhra University, Visakhapatnam, India, December 13-15, 2010, Vol. 1, pp.465-470.
- Sambhav, Kumar, Tandon, Puneet and Dhande, S.G., “Chisel Edge Indentation Model for Drills with Generic Point Profiles” Proc. 3rd International and 24th All India Manufacturing Technology, Design and Research Conference – AIMTDR, Andhra University, Visakhapatnam, India, December 13-15, 2010, Vol. 1, pp.459-464.
- Pal, Vijay & Tandon, Puneet, “Effect of Pressure Range on Material Response to Particle Impact on milled material during Controlled Depth Milling (CDM) In Abrasive Water Jet”,3rd International and 24th All India Manufacturing Technology, Design and Research Conference – AIMTDR, Andhra University, Visakhapatnam, India, December 13-15, 2010, pp. 449-453. (Presented by Puneet Tandon)
- Soni, Nisheet & Tandon, Puneet, "Path planning of a point robot in unknown environment", ICIRET 2010, Proceedings of International Conference on Innovative Research in Engineering and Technology 2010, Coimbatore, Tamil Nadu, August 12-14, 2010, pp. 1-4. (Presented by Nisheet Soni)
- Gupta, Vikas & Kasana K.S. Tandon, Puneet, “A Gradient Reference Modeling Approach for Heterogeneous Objects”, CAD'10, the 2010 International CAD Conference and Exhibition, Dubai, UAE, June 21-25, 2010. (Presented by Puneet Tandon)
- Khan, Md Rajik & Tandon, Puneet, “Computer-Aided Design and Analysis of a Custom-Engineered Form Milling Cutter”, CAD'10, the 2010 International CAD Conference and Exhibition, Dubai, UAE, June 21-25, 2010. (Presented by Md. Rajik Khan)
- Soni, Sitaram, Khanna, Pritee & Tandon, Puneet, “Multi-Agent Feature based Shape Grammar Implementation for Concept Generation of Industrial Product Design”, CAD'10, the 2010 International CAD Conference and Exhibition, Dubai, UAE, June 21-25, 2010. (Presented by Dr. Pritee Khanna)
- Sambhav, Kumar, Dhande, S.G. & Tandon, Puneet, “CAD Based Mechanistic Modeling of Forces for Generic Drill Point Geometry”, CAD'10, the 2010 International CAD Conference and Exhibition, Dubai, UAE, June 21-25, 2010. (Presented by Puneet Tandon)
- Gulati, Vishal & Tandon, Puneet, “A CAD Paradigm to Produce Blow Moulds for Decorated PET Bottles”, International Conference on Futuristic Computer Applications, 2010, IISc Bangalore.
- Tandon, Puneet and Khan, Md. Rajik, “Three Dimensional Modeling and Finite Element Simulation of a Generic End Mill”, Computer Aided Design, 2009, Vol.41, No.2, pp. 106-114.
- Gulati, Vishal Singh, Hari & Tandon, Puneet, “Integrative Modeling to Produce Ornamental Products”, Computer Aided Design & Applications, 2009, Vol. 6, No. 1, pp. 27-42.
- Gupta Vikas, Kasana K.S. & Tandon, Puneet, “Algorithm Design and CAD Model for Heterogeneous Objects”, International CAD Conference, CAD09, Reno, Nevada, USA, June 8-12, 2009.
- Gulati Vishal, Singh, H. & Tandon, Puneet, “Integrative Modeling to Produce Ornamental Products”, International CAD Conference, CAD09, Reno, Nevada, USA, June 8-12, 2009.
- Tandon Puneet, Johry Aakash & Rathore Harsh, “Development of a System for Rapid Prototyping of Heterogeneous Objects”, National Conference on Rapid Prototyping and Manufacturing, R.V. College of Engineering, Bangalore, India, May 12-13. 2009, Endorsed by Rapid Prototyping Society of India (RPSI).
- Gulati V., Singh, H. and Tandon, P., 2009. A CAD Paradigm to Produce Engraved Form of Ornamental Products. In: National Conference on Advances in Computer Networks & Information Technology (NCACNIT-09), GJU Hisar, Haryana, 24- 25 March 2009, pp.5-9.
- Tandon, Puneet, Gupta, P. and Dhande, S.G., "Geometric Modeling of Fluted Cutters", ASME Journal of Computing and Information Science in Engineering, 2008, Vol. 8, Issue 2, pp. 021007-1-15.
- Tandon, Puneet, Gupta, P. & Dhande, S.G., “Modeling of Twist Drills in terms of 3D Angles” International Journal of Advanced Manufacturing Technology, 2008, Vol. 38, No.5-6, pp. 543-550.
- Gulati, Vishal Singh, Hari & Tandon, Puneet, “A Parametric Voxel Based Unified Modeler for Creating Carved Jewelry”, Computer Aided Design & Applications, 2008, Vol. 5, No. 6, pp. 811-821.
- Saini, P.K., Kumar, P. and Tandon, Puneet, “Surface Roughness Effects in Elastohydrodynamic Line Contacts Using Couple Stress Fluid”, Proc. IMechE, Part J: J. Engineering Tribology, 2008, Vol. 222, No. 2, pp. 151-155.
- Tandon, Puneet, et al., “A Parametric Feature-based CAD System for Thin Objects”, Competitive Manufacturing, Proceedings on – 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference – AIMTDR, IIT Madras, Chennai, India, December 15-17, 2008, pp. 997-1002.
- Khan, Md Rajik & Tandon, Puneet, “Geometric Modeling and Analysis of Three Dimensional Generic End Mill Cutter”, Competitive Manufacturing, Proceedings on – 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference – AIMTDR, IIT Madras, Chennai, India, December 15-17, 2008, pp. 1029-1034.
- Gulati, Vishal, Singh, H. & Tandon, Puneet, “An Integrated CAD-CAM Approach for Islamic Star Pattern Ornamental Product Development”, International CAD Conference, CAD08, Orlando, Florida, USA, June 23-27, 2008.
- Tandon, Puneet, “Manufacturing Three-dimensional Components at the meso and micro scales: The Role of Information Theory in μ metrology”, National Conference on Futuristic Trends in Engineering and Technology, JNCDLM College of Engineering, Sirsa, January 28-29, 2008, pp. 12-16.
- Bansal, Rajesh Kumar, Goel, Vineet Kumar, Kumar, Punit & Tandon, Puneet, “Extraction of Thin-Metal Feature from Solid Model”, National Conference on Futuristic Trends in Engineering and Technology, JNCDLM College of Engineering, Sirsa, January 28-29, 2008, pp. 161-165.
- Goel, Vineet Kumar, Bansal, Rajesh Kumar, Garg, T.K. & Tandon Puneet, “Technical Approach to Jewellary Manufacturing: A Review”, National Conference on Futuristic Trends in Engineering and Technology, JNCDLM College of Engineering, Sirsa, January 28-29, 2008, pp. 166-171.
- Gulati, Vishal & Tandon, Puneet, “A Parametric Voxel Oriented CAD Paradigm to Produce Forming Components for Stretch Formed Jewelry”, Computer Aided Design & Applications, 2007, Vol. 4, No. 1-4, pp. 137-145.
- Saini, P.K., Kumar, P. & Tandon, Puneet, “Design and Analysis of Radially Tapered Disk Spring With Parabolically Varying Thickness” Proc. IMechE, Part C: Journal of Mechanical Engineering Science, 2007, Vol. 221, Issue C2, pp. 151-158.
- Saini, P.K., Kumar, P. & Tandon, Puneet, “Transient EHL Analysis of Involute Spur Gear Using Couple Stress Fluid”, Proc. IMechE, Part J: Journal of Engineering Tribology, 2007, Vol. 221, No. J6, pp. 743-754.
- Saini, P.K., Kumar, P. & Tandon, Puneet, “Thermal EHL Characteristics of Couple Stress Fluids in Rolling/Sliding Line Contacts”, Proc. IMechE, Part J: Journal of Engineering Tribology, 2007, Vol. 221, No. J2, pp. 141-153.
- Tandon, Puneet, Gupta, P. & Dhande, S.G., “Surface Modeling of Multi-Point, Multi-Flute Cutting Tools”, 2nd International Conference on Computer Graphics Theory and Applications, GRAPP 2007, Barcelona, Spain, March 08-11, 2007, pp. 172-175.
- Khanna, P., Tandon Puneet, & Dhande S.G., “Hierarchic Modeling of Symmetric Geometries”, 2nd International Conference on Computer Graphics Theory and Applications, GRAPP 2007, Barcelona, Spain, March 08-11, 2007, pp. 176-179.
- Gulati, Vishal & Tandon, Puneet, “A Parametric Voxel Oriented CAD Paradigm to Produce Forming Components for Stretch Formed Jewelry”, International CAD Conference, CAD07, Hawaii, USA, June 21-26, 2007, pp. 137-145.
- Tandon, Puneet & Siddhartha Kumar, “Curve Fitting for Styling Applications Using Genetic Algorithms”, International CAD Conference, CAD07, Hawaii, USA, June 21-26, 2007.
- Gupta, Vikas & Tandon, Puneet, “CAD Modeling and Process Planning for Rapid Manufacturing of Heterogeneous objects”, International CAD Conference, CAD07, Hawaii, USA, June 21-26, 2007.
- Tandon, Puneet & Siddhartha Kumar, “Curve Fitting for Virtual Prototyping Using Genetic Operators”, International Conference on Advanced Manufacturing Technologies, ICAMT-2007, CMERI, Durgapur, November 29-30, 2007, pp. 239-244.
- Gulati, Vishal & Tandon, Puneet, “A Linguistic Approach for modeling the two and half dimensional components”, IE(I) Journal -CP (Computer Division), Nov 2006, Vol. 87, pp. 1-6.
- Tandon, Puneet, Gupta, P. & Dhande, S.G., “Rapid Manufacturing of Multi-point Cutting Tools – Geometric Modeling Approach”, Japan-India Symposium on Micro/Nano Manufacturing Techniques, Tokyo, February 18-25, 2006. (Invited Paper)
- Gupta, Vikas & Tandon, Puneet, “CAD Modeling and Process Planning for Rapid Manufacturing of Heterogeneous objects”, IndoUS Workshop on Rapid Manufacturing, Bangalore, April 17-19, 2006. (Invited Paper)
- Tandon, Puneet, Gupta, P. & Dhande, S.G., “Virtual Prototyping and Rapid Manufacturing of Twist Drills” 17th IEEE International Workshop on Rapid System Prototyping, Chania, Crete, June 14-16, 2006.
- Goel, Vineet Kumar, Bansal, Rajesh Kumar & Tandon, Puneet, “A Geometric Modeling Schema for Non-Manifold Gold Metal Ornaments”, Proceedings 1st International and 22nd All India Manufacturing Technology, Design and Research Conference – 22nd AIMTDR, Roorkee, India, December 21-23, 2006, pp. 29-33.
- Tandon, Puneet, Gupta, P. & Dhande, S.G., “Geometric Modeling of Solid Twist Drills”, Proceedings First International and 22nd All India Manufacturing Technology, Design and Research Conference – 22nd AIMTDR, Roorkee, India, December 21-23, 2006, pp. 137-142.
- Tandon, Puneet, Gupta, P. & Dhande, S.G., “Geometric Modeling of End Mills”, Computer Aided Design and Applications, 2005, Vol. 2, Nos. 1-4, pp. 57-65.
- Tandon, Puneet & Kant, Anuj, “A CAD System for the Heterogeneous Solid Modeling” International Journal of Computers Application in Technology, 2005, Vol.24, No.4, pp. 226-235.
- Tandon, Puneet, Gupta, P. & Dhande, S.G., “Geometric Modeling of End Mills”, International CAD conference and Exhibitions - CAD'05, Bangkok, Thailand, June 20-24, 2005.
- Saini, P.K., Tandon, Puneet & Rao, P.V.M., “An Approach to Integrate Design and Analysis Phase in the Product Development Cycle”, Proceedings of All India Seminar on Emerging Trends In Mechanical Engineering, N.I.T. Kurukshetra, India, March 29-30, 2005, pp. 9-13.
- Tandon, Puneet & Sharma, Dheeraj, “Problems encountered in getting returns from ERP implementation”, Proceeding of All India Seminar on Emerging Trends In Mechanical Engineering, N.I.T. Kurukshetra, India, March 29-30, 2005, pp. 537-540.
- Tandon, Puneet & Kant, Anuj, “A Modeling and Manufacturing strategy for the Heterogeneous Solids” International Journal of Manufacturing Technology and Management, 2004, Vol.6, No.5, pp. 485-500.
- Tandon, Puneet et al., “Visibility Determination of Objects Modeled on CSG Hierarchy” International Journal of Engineering Simulation, 2004, Vol.5, No.2, pp. 38-44.
- Tandon, Puneet, Gupta, P. & Dhande, S.G., “Geometric Modeling of Slab Mills”, International CAD conference - CAD'04, Pattaya Beach, Thailand, May 24-28, 2004.
- Tandon, Puneet, “A CAD System for the Heterogeneous Solid Modeling for Layered Manufacturing” National Conference on Emerging Trends in Mechanical Engineering, Padre Conceição College of Engineering, Verna, Goa, India, September 10-12, 2004, pp. 63-68.
- Tandon, Puneet, Gupta, P. & Dhande, S.G., "Geometric Modeling of Single-point Cutting Tools", International Journal of Advanced Manufacturing Technology, 2003, Vol. 22, No. 1-2, pp. 101-111.
- Tandon, Puneet, Gupta, P. and Dhande, S.G., "Virtual Shape Prototyping of Side Milling Cutting Tool", The 3rd IASTED International Conference on Visualization, Imaging, and Image Processing - VIIP 2003, Benalmádena, Spain, September 8-10, 2003, pp. 767-772.
- Tandon, Puneet, Gupta, P. and Dhande, S.G., "Grinding and Resharpening of Single-point Cutting Tools: An approach based on Computer Aided Geometric Design", International Conference on CAD, CAM, Robotics and Autonomous Factories (INCARF 2003), I.I.T. Delhi, India, August 11-13, 2003.
- Kumar, R., Prasad, K.S., Tandon, Puneet and Sahay, B., "Modeling of Composite and Sheet Metal Tooling using Rapid Prototyping", International Conference on Digital Aided Modelling and Simulation, Coimbatore, India, Paper # 73, January 6-8, 2003.
- Tandon, Puneet, Gupta, P. and Dhande, S.G., "Geometric Modeling of Side Milling Cutting Tool Surfaces", International Journal of Engineering Simulation, Vol. 3, No.3, 2002, pp. 21-29.
- Tandon, Puneet, Gupta, P. and Dhande, S.G., "Geometric Modeling of Side Milling Cutting Tool Surfaces", The First International Conference on Inverse Problems: Modeling and Simulation, Turkey, 2002.
- Tandon, Puneet, Gupta, P. and Dhande, S.G., "Virtual Prototyping and Manufacturing of Insert-based Single Point Cutting Tool", International Conference on e-Manufacturing, M.A.C.T. Bhopal, India, November 17-19, 2002, pp. 325-330.
- Tandon, Puneet et al., “Feature Based Design and Rapid Product Development of Saddletree”, International Journal of Agile Manufacturing, Vol. 4, No. 2, 2001, pp. 147-161.
- Dhande, S.G., Tandon, Puneet & Agarwal, A.K., "Design and Prototyping using Point Clouds", Proceedings of National Symposium on Manufacturing in Twenty First Century, I.I.T. Kanpur, India, February 2-3, 2001, pp. 1-5. (Invited Paper)
- Tandon, Puneet et al., "Mathematical Modeling and Simulation of Scooter Suspension System", National Conference on Mathematical and Computation Models, PSG College of Technology, Coimbatore, December 27-28, 2001, pp. 271-277.
- Dhande, S.G., Agarwal, S. & Tandon, Puneet, “Geometric and Material considerations in Rapid Prototyping Processes”, Proceeding of Asian Academy Seminar on Advanced Manufacturing Systems, Hyderabad, India, Dec 3-12, 2000, Edited by M. Kiuchi and A. Ghosh, pp. 198-204. (Invited Paper)
- Tandon, Puneet et al., "Computer Aided Design and Development of Saddle-Tree", Proceedings All India SDRC Users' Conference, Pune, October 9-11, 2000.
- Tandon, Puneet et al., "Modeling and Simulation of Scooter Suspension System", MATLAB India Millennium Conference, Bangalore, November 15-17, 2000.
- Tandon, Puneet & Jain, A., "An Expert System for Computer-aided Process Planning of Electrical Discharge Machining", Proceedings International Conference on Advances in Mechanical and Industrial Engineering, U.O.R., Roorkee, Feb 6-8, 1997, pp. 701-707.
- Tandon, Puneet & Jain, A., "Scheduling a Material Handling Equipment in flexible Manufacturing Cell", Proceedings National Conference on Recent Advances in Mechanical Engineering, R.E.C. Kurukshetra, March 7-8, 1997, pp. 232-239.
- Jain, A., Tandon, Puneet & Mehta, N.K., "A Heuristic Algorithm for Cutting Stock problem", International Conference on CAD/CAM, Robotics and Factories of the Future (INCARF '96), Jamia Millia Islamia, New Delhi, Dec 17-20, 1996, pp. 339-346.
- Tandon, Puneet & Jain, A., "Design of an Automatic Storage/Retrieval System to ascertain least possible total cost at desired system throughput using Optimization Approach", Proceedings National Conference on Operations Research in Modern Technology, R.E.C. Kurukshetra, March 8-9, 1996, pp. E27-35.
- Tandon, Puneet & Jain, A., "An Algorithm and Data Structure to generate the curve of intersection of Parametric Surfaces by Subdivision Technique", Proceedings National Symposium on Recent Trends in Computer Applications in Engineering, G.Z.S. College of Engineering, Bhatinda, March 8-9, 1996.
- Tandon, Puneet, "Intersection of Parametric Surfaces using Quadtree Models", Proceedings International Conference on Advances in Mechanical Engineering, I.I.Sc., Bangalore, Dec. 20-22, 1995, pp. 45-52.
-
-
Member, Organizing Committee, 1st International and 4th National Conference on Reliability and Safety Engineering (INCRS-2018), February 26-28, 2018, IIITDM Jabalpur, India
-
Coordinator, GIAN Course on “Production Logistics: Theoretical and Practical approach to the Theory of Constraints”, Resource Person: Professor Alexandar Pesin
-
Coordinator, One Week Short Term Training Program (STTP) on “Mechanical Manufacturing & Monitoring using MATLAB” (MMM-2017), Sponsored by Electronics & ICT (E&ICT) Academy, PDPM IIITDM Jabalpur at VNIT Nagpur, December 11-16, 2017
-
Coordinator, One Week Short Term Training Program (STTP) on “Mechanical Manufacturing & Monitoring using MATLAB” (MMM-2017), Sponsored by Electronics & ICT (E&ICT) Academy, PDPM IIITDM Jabalpur at VNIT Nagpur, December 11-16, 2017
-
Organized a One-day Event on nurturing startups - “Zero to One” in association with ‘Jabalpur Startup’, PDPM IIITDM Jabalpur, April 15, 2017
-
Organized a One-day Workshop on “IP AWAKE - An Awareness Seminar on Intellectual Property Rights for Academia” in coordination with Confederation of Indian Industry (CII) and Intellectual Property India (IP), PDPM IIITDM Jabalpur, January 21, 2017
-
Coordinator, Design Workshop on “Internet of Process Centric Design and Manufacture”, PDPM IIITDM Jabalpur, December 12-14, 2016
-
ICMME 2016, International Conference on Mechatronics and Mechanical Engineering, Shanghai, China, October 21-23, 2016
-
2016 International Conference on Design, Materials and Manufacturing (ICDMM 2016), Kuala Lumpur, Malaysia, March 25-27, 2016
-
Coordinator, Design Workshop on “Process Centric Design and Manufacture”, PDPM IIITDM Jabalpur, December 8-10, 2015
-
2015 ASME IMECE (ASME International Mechanical Engineering Congress & Exposition), Houston, TX, US, November 13-19, 2015
-
ICMME 2015, International Conference on Mechatronics and Mechanical Engineering, Singapore, September 15-16, 2015
-
Coordinator, Design Workshop on “User Centric Design”, PDPM IIITDM Jabalpur, December 8-10, 2014
-
12th International Ergonomics Conference - HWWE 2014 – Humanizing Work and Work Environment December 3-5, 2014 at IIT Guwahati
-
ICMME 2014, International Conference on Mechatronics and Mechanical Engineering, Chengdu, China, September 6-8, 2014
-
Coordinator, Workshop on “IPR Awareness”, PDPM IIITDM Jabalpur, February 8, 2014
-
Member, Organizing Committee, IEEE Sponsored International Conference on Control, Automation, Robotics and Embedded Systems (CARE 2013), December 16-18, 2013, PPDM IIITDM Jabalpur
-
Member, Organizing Committee, Mini Design Workshop (Mini DeW 2013), December 6-7, 2013, PPDM IIITDM Jabalpur
-
ICMCE 2013, International Conference on Mechanics and Control Engineering, Beijing, China, September 1-2, 2013
-
ICCIIS’13, The 2013 International Conference of Computational Intelligence and Intelligent Systems, World Congress on Engineering 2013, London, U.K., 3-5 July 2013
-
Coordinator, International Conference on Innovations in Design and Manufacturing (InnDeM 2012), PDPM IIITDM Jabalpur, December 5-7, 2012
-
ICMCE 2012, International Conference on Mechanics and Control Engineering, Shanghai, China, August 25-26, 2012
-
ICIVC 2012, International Conference on Image, Vision and Computing, Shanghai, China, August 25-26, 2012
-
CAD'12, the 2012 International CAD Conference and Exhibition, Niagara Falls, Ontario, Canada, June 11-14, 2012
-
ICMST 2011, International Conference on Manufacturing Science and Technology, Singapore, September 16-18, 2011, Organized by IACSIT and Singapore Institute of Electronics.
-
CAD'11, the 2011 International CAD Conference and Exhibition, Taipei, Taiwan, June 27-30, 2011
-
3rd International and 24th All India Machine Tool Design & Research Conference, Andhra University, Vishakapatnam, India, December 13-15, 2010
-
Organized three conferences of national level at N.I.T./R.E.C. Kurukshetra
-
Organized a 5-day Workshop on “Design (DeW 2010)” during October 11-15, 2010 on “Leading-edge Theories and Practices in Design” along with Japanese Collaborators
-
CAD'10, the 2010 International CAD Conference and Exhibition, Dubai, UAE, June 21-25, 2010.
-
2nd International and 23rd All India Machine Tool Design & Research Conference, IIT Madras, Chennai, India, December 15-17, 2008
-
International Workshop on Futuristic Shaping Technology at Meso, Micro and Nano Scales at IIT Kanpur, India, October 9 – 12, 2007
-
2nd International Conference on Computer Graphics Theory and Applications, GRAPP 2007, Barcelona, Spain, March 08-11, 2007
-
1st International and 22nd All India Machine Tool Design & Research Conference – 22nd AIMTDR, IIT Roorkee, Roorkee, India, December 21-23, 2006
-
Indo-US workshop on Rapid Manufacturing, Bangalore, April 17-19, 2006
-
Japan-India Symposium on Micro/Nano Manufacturing Techniques, Tokyo, February 18-25, 2006
-
Member, Organizing Committee, National Workshop on “Future of the Past: Use of Modern Technologies in the Study of the Past", held at IIT Kanpur, 12 June to 7 July, 2006
-
Member, Organizing Committee, International Symposium on Frontiers of Research on Speech and Music (FRSM 2006), January 9-10, 2006
-
Member, Organizing Committee, National Workshop on “Tsunami Rehabilitation”, September 23-25, 2005
-
Organized a Two-day Workshop on “Design and Development of NDT Equipment for Product Development” from Department of Science & Technology, New Delhi on September 01-02, 2005
-
Member, Organizing Committee, All India Seminar on Emerging Trends In Mechanical Engineering, N.I.T. Kurukshetra, India, March 29-30, 2005
-
All India Seminar on Emerging Trends in Mechanical Engineering, National Institute of Technology Kurukshetra, India, March 29-30, 2005
-
National Conference on Emerging Trends in Mechanical Engineering, Padre Conceição College of Engineering, Verna, Goa, India, September 10-12, 2004
-
International Conference on CAD, CAM, Robotics and Autonomous Factories (INCARF 2003), I.I.T. Delhi, India, August 11-13, 2003
-
Officer-in-Charge, Literati (Students’ Technical Symposium), N.I.T., Kurukshetra, 2003. National Symposium on Manufacturing Engineering in Twenty First Century, Indian Institute of Technology, Kanpur, March 2-3, 2001
-
All India SDRC Users’ Conference, New Delhi, October 8-10, 1999
-
National Conference on Recent Advances in Mechanical Engineering, Regional Engineering College, Kurukshetra, March 7-8, 1997
-
Joint Secretary, Organizing Committee, National Conference on Recent Advances in Mechanical Engineering, R.E.C. Kurukshetra, March 7-8, 1997
-
International Conference on Advances in Mechanical and Industrial Engineering, University of Roorkee, Roorkee, Feb. 6-8, 1997
-
National Conference on Operational Research in Modern Technology, Regional Engineering College, Kurukshetra, March 8-9, 1996
-
Member, Organizing Committee, National Conference on Operations Research in Modern Technology, R.E.C. Kurukshetra, March 8-9, 1996
-
International Conference on Advances in Mechanical Engineering, Indian Institute of Science, Bangalore, Dec. 20-22, 1995
-
Chair, Start-Up and Tech Briefings Track, 13th Innovations in Software Engineering Conference (ISEC 2020), PDPM IIITDM Jabalpur, 27-29 February 2020
-
Co-Chair, 1st International Conference on Industry 4.0 and Advanced Manufacturing (I-4AM 2019), Indian Institute of Science, Bengaluru, 28-29 June 2019
-
Coordinator, One Week Short Term Training Program (STTP) on “Mechanical Manufacturing & Monitoring using MATLAB” (MMM-2018), Sponsored by Electronics & ICT (E&ICT) Academy, PDPM IIITDM Jabalpur at VNIT Nagpur, December 06-11, 2018
-
Co-Chair, iNaCoMM2021: 5th International and 20th National Conference on Machines and Mechanisms, PDPM IIITDM Jabalpur, 9-11 December 2021
-
Co-Chair, 2nd International Conference on Industry 4.0 and Advanced Manufacturing (I-4AM 2022) (Online), Indian Institute of Science, Bengaluru, 10-11 January 2022
-
Topic Chair, ASME International Mechanical Engineering Congress & Exposition (IMECE) 2022, Columbus, OH, USA, October 30 - November 3, 2022
-
Program Coordinator, E&ICT Academy-sponsored Faculty Development Program (FDP) on Curriculum Development in the Light of NEP 2020, PDPM Indian Institute of Information Technology, Design and Manufacturing, Jabalpur, August 8-19, 2022
M. Tech./M.Des.
Ph. D.
Contact me
Feel free to contact
Puneet Tandon
ptandon@iiitdmj.ac.in
https://www.facebook.com/puneet.tandon01
https://in.linkedin.com/in/puneettandon01
puneet.tandon01@gmail.com
91-761-2794411
(Fax) 91-+91-761-279 4411
